Board Logo
Go To Bottom

Printable Version  
[ Total Views: 599 | Total Replies: 3 | Thread Id: 88968 ]
Author: Subject:  Compression?
MemberSuper1302
Officially Full-On Dubber
***


Avatar


Posts: 361
Threads: 76
Registered: July 31st, 2008
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on February 26th, 2011 at 02:06 PM
Compression?


i am running a 2332cc engine with fk10 with 48 ida's.
what compression should i be running with the fuels that we have. is 10:1 too high.
i want to run on the street and take for a run down the track every now and then.

cheers:tu:
MemberOllie
A.k.a.: Ollie Clarke
Insano Dub Head
Yeah Buddy
****


Avatar


Posts: 840
Threads: 122
Registered: October 5th, 2009
Member Is Offline

Location: Sydney
Theme: UltimaBB Streamlined2
Mood: Hungry for another 676cc

posted on February 26th, 2011 at 04:52 PM



10:1 will be ok as long as you're putting in 98 and have adequate cooling :)
A good friend of mine was running a 2276 with 10.5:1 every day and it was fine.

Sounds like a beast :)




Follow the Photo Fun:
http://forums.aussieveedubbers.com/viewtopic.php?tid=95238 

- '70 1500 Beetle (The Clean One)
- '76 1300 Beetle (The In-between One)
- '69 1500 Beetle (The Mean One)
Super Moderatormatberry
Super Moderator
Go hard or go home
*******

Rank Avatar

Avatar


Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline

Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3

posted on February 27th, 2011 at 09:40 AM



There are a few details that need to be fine tuned first, like where do you live and exact useage (altitude and ambient temperature and type of driving are why this is asked) What heads and exhaust, any coatings internally? Sump and oil system used?

10:1 will live ok used daily and raced but it would definately require sump, ext cooler/filter, ceramic piston tops, etc etc. esp if you drive at 110km/h with a close box in the middle of summer towing a trailer to the dump 120km away!!!! Also as Clarky said...adequate cooling, that means an early car requires a vented or IMO top propped decklid with the large cooling fan..... (again etc etc etc) It's all in the details.

For the record, I'd bring it down some depending on the answers to some of the above questions.




Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
http://i375.photobucket.com/albums/oo199/mattberry-photo/20032011354-2.jpg
MemberSuper1302
Officially Full-On Dubber
***


Avatar


Posts: 361
Threads: 76
Registered: July 31st, 2008
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on February 27th, 2011 at 04:52 PM



live on the coast, have large gene berg sump and filter, most prob get fan for cooler.
the heads are 040's with 44 x 37.5 and 52cc chambers. yep 44 x 37.5 in superbug.
no low ratio gearbox just an AT id'd single side plate. std ratio.

cheers for the coments. taken onboard, i would use the cooling, i like to by default.
can never have enough.

Paul:D


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 1.7% - SQL: 98.3% ]