Board Logo
Go To Bottom

Printable Version  
[ Total Views: 2733 | Total Replies: 7 | Thread Id: 90948 ]
Author: Subject:  Reduction hubs trying to stop wheel spin..
MemberCaroneten
Seriously Crusin Dubber
**


No Avatar


Posts: 135
Threads: 35
Registered: June 9th, 2005
Member Is Offline

Location: Gatton
Theme: UltimaBB Pro Blue ( Default )
Mood: Chillin

posted on June 9th, 2011 at 09:04 PM
Reduction hubs trying to stop wheel spin..


Hi All

I have a kombi with reduction hubs on it, It has a v6 motor and having major trouble with it being able to break traction at speed as the rear of the kombi rises, it seems to unload the power when the vehicle hits a bump. Just wondering has anyone else experienced this and if so will weighting the vehicle be any use?

Thanks
BJ
Memberernie norley
Commited Dubber
**


No Avatar


Posts: 64
Threads: 13
Registered: January 8th, 2009
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on June 11th, 2011 at 04:15 PM



Gday caronten. I hag a split in the 80's running twin webered 180b motor it used to break transmissions across the diff housing. after 3 boxes I swapped over to bay kombi IRS & used a single plate beetle box. It was a totally different car to drive handling around corners improved.bit of work but well worth the effort
Ernie
MemberCraig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
*********


Avatar


Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline

Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.

posted on June 11th, 2011 at 04:21 PM



yep, do the IRS conversion.:tu:



Member68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
**********


Avatar


Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline

Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -

posted on June 11th, 2011 at 08:52 PM



Quote:
Originally posted by Caroneten
Hi All

I have a kombi with reduction hubs on it, It has a v6 motor and having major trouble with it being able to break traction at speed as the rear of the kombi rises, it seems to unload the power when the vehicle hits a bump. Just wondering has anyone else experienced this and if so will weighting the vehicle be any use?

Thanks
BJ


reduction rear hubs were there because of the low power VW engines...
so
more power means replacing the reduction hubs before something goes BANG....

they were designed for the low powered & low geared VW engines and to carry loads....

You will need to replace the reduction hubs...

either with Swing axle gearbox etc... OR

IRS rear end with CV Joints....

Lee




- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
Memberbevelhead
Seriously Crusin Dubber
**


No Avatar


Posts: 161
Threads: 40
Registered: August 18th, 2008
Member Is Offline

Location: Cremorne TAS
Theme: UltimaBB Pro Blue

posted on August 28th, 2011 at 08:42 PM



try a johnson no hop kit, counteracts the reduction gears trying to ride up the driven gear
Membersilver
Veteran Volks Folk
Dangerous when poked
*****


Avatar


Posts: 2169
Threads: 162
Registered: December 8th, 2002
Member Is Offline

Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: In 2 Minds

posted on August 29th, 2011 at 06:15 AM



Why would you want to break traction?



Keeping it real !
Member11CAB
Compulsive Aussie Vee Dubber
If ya got it....Baja it
*******


Avatar


Posts: 4674
Threads: 321
Registered: August 30th, 2002
Member Is Offline

Location: Brisbane Northside
Theme: UltimaBB Pro Blue
Mood: Beach'n

posted on August 29th, 2011 at 10:26 AM



Is that the old "Gyros" twincab? If so, it's already IRS and has a CV flange on the reduction hubs to go to the 2L kombi box.



65 Meyers Manx
68 Country Buggy (KO 367)
68 Country Buggy (KO 669)
68 Country Buggy (KO 789)
68 Country Buggy (KO 815)
68 Baja Bug
76 Baja Kombi Twincab
Memberbevelhead
Seriously Crusin Dubber
**


No Avatar


Posts: 161
Threads: 40
Registered: August 18th, 2008
Member Is Offline

Location: Cremorne TAS
Theme: UltimaBB Pro Blue

posted on August 29th, 2011 at 07:34 PM



Quote:
Originally posted by 11CAB
Is that the old "Gyros" twincab? If so, it's already IRS and has a CV flange on the reduction hubs to go to the 2L kombi box.


Do you know how they did that? weld flange on to cut down original axle? or use type 1 stub which im led to believe will fit early reduction gear?...


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 21.4% - SQL: 78.6% ]