| [ Total Views: 874 | Total Replies: 8 | Thread Id: 91033 ] |
|
|
 matara
Custom Title Time!
Posts: 1342
Threads: 255
Registered: August 25th, 2002
Member Is Offline
Location: Melrose Park, Sydney
Theme: UltimaBB Pro Grey
Mood: 356'd
|
| posted on June 14th, 2011 at 04:14 PM |
|
|
Banded / replacement rims
I have an original Lemmertz 356 wheel that has rusted around the valve area. The rim is pretty beat too.
Can i get it rebanded using the 356 centre? Any idea who would do this?
Thanks
Steve
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on June 21st, 2011 at 07:25 AM |
|
|
Banding is illegal in Oz but welding a new centre in is do-able. Trouble is you have to find a donor rim of the same inner diameter to match your 356
centre so I'd suggest looking at M7 or midland wheels in the UK for a replacement.
Also, if a true 356 then it's an alloy centre and steel rim so not sure who could join the 2 properly and with minimal run-out.
madness is in the eye of the beholder  |
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on June 21st, 2011 at 07:43 AM |
|
|
Steve
Contact VVDS
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on June 21st, 2011 at 11:40 AM |
|
|
| Quote: | Originally
posted by matara
I have an original Lemmertz 356 wheel that has rusted around the valve area. The rim is pretty beat too.
Can i get it rebanded using the 356 centre? Any idea who would do this?
Thanks
Steve
|
with all the laws and regulations these days its hard to find people who will actually do the job unless its for an offroad unregistered vehicle..
I had Renault R10 in the 70s that had very narrow wheels and 135 x 15 michelin tyres. I took My car to somewhere in Newcastle and they welded in new
widened rims and fitted new 155 x 15 tyres... I believe it had to be a tyre shop I went to????
so, I'm assuming many people can do that... even change the offset of the rim??
best of luck
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
Aussie Dubbin
Fahrvergnugen
Posts: 895
Threads: 90
Registered: July 21st, 2008
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 21st, 2011 at 01:39 PM |
|
|
terminology
Hi guys,
i think there is a little change in terminology as the post goes from different people.
'Banded' type wheels usually refer to cutting the rim and adding a wider/section of steel to the rim and then welding back together to make a wider
original wheel.
I would suggest that you take the wheel to someone who can remove the inner center, then weld/bolt/press that into a 'new' rim of the width that you
are after. This is not a new process and you might have some offset to play with. Just rememer what you are changing from and to.
There is a guy in Adelaide that could do this (obviously he would have to see it first)
|
|
|
1500S
Custom Title Time!
Posts: 1418
Threads: 73
Registered: March 28th, 2005
Member Is Offline
Location: Nth Richmond, N.S.W
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 22nd, 2011 at 09:00 AM |
|
|
| Quote: | Originally
posted by matara
I have an original Lemmertz 356 wheel that has rusted around the valve area. The rim is pretty beat too.
Can i get it rebanded using the 356 centre? Any idea who would do this?
Thanks
Steve
|
As you are in the Sydney area give these fellows at Circle Track Wheels a call. Not sure what they are like since the original owner Ray Eldershaw
retired and sold the business some years back. Maybe they can match a rim to your old centres.
9674 5651
U4/ 27 Anvil Rd
Seven Hills
NSW 2147
|
|
|
matara
Custom Title Time!
Posts: 1342
Threads: 255
Registered: August 25th, 2002
Member Is Offline
Location: Melrose Park, Sydney
Theme: UltimaBB Pro Grey
Mood: 356'd
|
| posted on June 22nd, 2011 at 10:00 AM |
|
|
Thanks guys, yes I'm not looking to insert any extra width, just looking to keep the Lemmertz centre and weld a new rim on it, in the same offset and
same width. I'm thinking that it might be easier to use a beetle rim, cut the centre out (using a large lathe n a machine shop I presume), and then
do the same to my Lemmertz rim, and have the beetle rim welded to the Lemmertz centre. I'll give Circle Track Wheels a call.
I'll try and get a picture of what I am working with.
Thanks
Steve
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on June 22nd, 2011 at 11:21 AM |
|
|
i had a squareback that had wheels done like that. was 14x6 ET 15
was beautifully done and I ended selling them after I tried to keep them for some time after the square was sold.
realised I had no use for them.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on June 22nd, 2011 at 01:10 PM |
|
|
Hi
I've used these people in the past http://www.nealewheels.com.au/
Steve
|
|
|
