Aussieveedubbers - Non-VW Engine Conversions - ej25 cam angle sensor fault

Home

FAQ

Topic Activity Forum Stats

Stats

Banners

Last active: Never

Not logged in [ Log In - Register ]

Aussieveedubbers

Non-VW Engine Conversions

ej25 cam angle sensor fault

[ Total Views: 1305 | Total Replies: 1 | Thread Id: 91460 ]

« View Previous Thread

View Next Thread »

veedubberpaul58

Casual Dubber

Posts: 48
Threads: 3
Registered: July 6th, 2011
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on July 8th, 2011 at 09:21 AM

ej25 cam angle sensor fault

recently on a couple of occasions my ej25 powered transporter basically stopped whilst idleing.....and once struggled to fire on start up......it ticked over fine but just didnt do anything ....

i had one fault code out of all these events which was cam angle sensor.

having had a spare one i replaced it and havent had any issues since.

This sensor may also be the victim of a bit of oil as its located under the oil filler neck on the motor which may have something to do with the intermittant problem....

it appears to look very similar to a crank angle sensor except for a sleeve over the outside of the sensor i wonder if they are interchangeable.....they are doing a similar job

http://www.steelart.com.au

http://www.crankykits.com.au

Joel

Scirocco Rare
Now containing 100% E-Wang

Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline

Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00

posted on July 8th, 2011 at 01:12 PM

You're right, it's usually leaking oil that gets them but the other thing is when crap sticks to the sensing surface.
one of mine did that.

They are the same sensors crank and cam, but the plugs are different and cable length so they can't be mixed up.

Aussieveedubbers

Non-VW Engine Conversions

ej25 cam angle sensor fault

Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 8.0% - SQL: 92.0% ]