| [ Total Views: 1084 | Total Replies: 9 | Thread Id: 91599 ] |
|
|
 roofchop
Seriously Crusin Dubber
Posts: 177
Threads: 37
Registered: January 30th, 2011
Member Is Offline
Location: Burringbar NSW
Theme: UltimaBB Streamlined2
Mood: In the mood for a beer usually
|
| posted on July 16th, 2011 at 02:21 PM |
|
|
Beam narrowing?
Hey guys,
I have a 67 beetle, 2"dropped spindles,Wide 5-205's with 145/65/15's and just about to fit beam adjusters...
Before doing the adjusters I filled the load area with about 100 kg of sand bags to see how it will look...
Looks great but I will still get tyre contact on the guards when on full lock.
So I thought I would narrow the beam 2".
Looking at it now the shock towers are nearly touching the inner guards so if they move in an inch the guard will have to cut/modded, also ithey will
be right on the edge of the fuel tank!
Is this normal for a mere 2" narrowed beam?
What am I missing here?
Thanks in advance
Dave
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on July 16th, 2011 at 02:32 PM |
|
|
| Quote: | Originally
posted by roofchop
Hey guys,
I have a 67 beetle, 2"dropped spindles,Wide 5-205's with 145/65/15's and just about to fit beam adjusters...
Before doing the adjusters I filled the load area with about 100 kg of sand bags to see how it will look...
Looks great but I will still get tyre contact on the guards when on full lock.
So I thought I would narrow the beam 2".
Looking at it now the shock towers are nearly touching the inner guards so if they move in an inch the guard will have to cut/modded, also ithey will
be right on the edge of the fuel tank!
Is this normal for a mere 2" narrowed beam?
What am I missing here?
Thanks in advance
Dave
|
I think that's correct Dave
that's why I don't like them...
the other way....
is to adjust the FULL lock on each side so the tyres don't touch...
even with those small tyres on the front..
You may need to heighten the front slightly...
or use wheels widened on the outside...
cheers
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
hellbugged
A.k.a.: Daimo Pell
23 Windows of Awesome
48's and straight cuts
Posts: 5080
Threads: 116
Registered: April 17th, 2003
Member Is Offline
Location: Nambucca Valley NSW
Theme: UltimaBB Psyche Blue
Mood: Couldn't care less
|
| posted on July 16th, 2011 at 04:19 PM |
|
|
http://www.btinternet.com/~aircooled/wolfsburgeast/beamnarrow.html
|
|
|
roofchop
Seriously Crusin Dubber
Posts: 177
Threads: 37
Registered: January 30th, 2011
Member Is Offline
Location: Burringbar NSW
Theme: UltimaBB Streamlined2
Mood: In the mood for a beer usually
|
| posted on July 17th, 2011 at 11:43 AM |
|
|
Thanks for the replies,
That link is the go, I will do exactly that, cheers Hellbug!
Dave
|
|
|
roofchop
Seriously Crusin Dubber
Posts: 177
Threads: 37
Registered: January 30th, 2011
Member Is Offline
Location: Burringbar NSW
Theme: UltimaBB Streamlined2
Mood: In the mood for a beer usually
|
| posted on July 17th, 2011 at 11:51 AM |
|
|
Thanks for the offer turbo66, I really want to do it all myself.
(I can't PM yet)
Cheers
Dave
|
|
|
roofchop
Seriously Crusin Dubber
Posts: 177
Threads: 37
Registered: January 30th, 2011
Member Is Offline
Location: Burringbar NSW
Theme: UltimaBB Streamlined2
Mood: In the mood for a beer usually
|
| posted on July 17th, 2011 at 12:27 PM |
|
|
Just thought of another issue...
I have an anti roll/sway bar (just fitted new bushes...what a pig of a job!)
How do you go about shortening that/
I'm guessing just straightening one end then re-bend 2" in.
The question is to cold bend it or heat it up....cold it may snap, hot it may loose its springyness?
what have you lot done?
Cheers Dave
|
|
|
zayus
A.k.a.: Bryce
Wolfsburg Wizard
Posts: 437
Threads: 26
Registered: September 8th, 2002
Member Is Offline
Location: North of the Bridge
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 17th, 2011 at 12:58 PM |
|
|
Hi Dave,
You can buy a 2 inch narrowed front sway bar.
Bugpack - available thru CIP in the US - http://www2.cip1.com/ProductDetails.asp?ProductCode=C12%2D6500%2D40
EMPI - available thru Classic Vee Dub in Sydney - https://www.classicveedub.com.au/cvd_new/part_detail.aspx?parts_id=15072
|
|
|
captainvw
Officially Full-On Dubber
Posts: 230
Threads: 24
Registered: February 28th, 2007
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 17th, 2011 at 08:27 PM |
|
|
2'' narrowed isn't enough for going low (any lower than 100mm) my first beam was a 2'' and it split the outer lip of the gaurd with in a month
you can go 4'' with flat style end plated or 4 and a bit with Tin KDF (Bugboy) designed end plates
|
|
|
Ryno17
Commited Dubber
Posts: 50
Threads: 21
Registered: January 3rd, 2011
Member Is Offline
Location: Coramba NSW
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 18th, 2011 at 08:50 PM |
|
|
| Quote: | Originally
posted by captainvw
2'' narrowed isn't enough for going low (any lower than 100mm) my first beam was a 2'' and it split the outer lip of the gaurd with in a month
you can go 4'' with flat style end plated or 4 and a bit with Tin KDF (Bugboy) designed end plates
|
Dub beams are the G O. Fitted one to my 61. Wheels don't rub at all and it sits about one inch off the deck. Really strong well made Aussie too!
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on July 18th, 2011 at 10:04 PM |
|
|
These beams look great. Saw them in posts ages ago. How much for one?
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
