| [ Total Views: 1536 | Total Replies: 14 | Thread Id: 91714 ] |
|
|
 Ftumpch
Learner Dubber
Posts: 6
Threads: 2
Registered: July 22nd, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 22nd, 2011 at 01:21 PM |
|
|
Daily-driver Beetle 1300, trying to join the 21st century
Hi there,
Well, I’ve resisted joining up here because I feel as though I haven’t had much to report, but hopefully that will be changing soon…
I have had my ’72 Beetle 1300 for about 18 months. I inherited it from my brother when he went overseas, and to be honest I initially didn’t know
quite what to do with it as I had just moved to Sydney and already had another car – a great big Jaguar XJR. However I soon found myself getting
totally bored in the Jag on my daily, 40Ks-each-way commute to work, and started driving the beetle… Instant revelation! I just can’t describe how
impressed I am with this little car. I still really enjoy driving it every day, and the only time it lets me down is when I run out of fuel (fuel
gauge is the only thing that doesn’t work…). I’ve subsequently sold the Jag.
However the time has come when I’ve started thinking about doing some work to the car, and I’m planning to take it off the road when the rego runs
out next month. There is some rust that needs seeing to, and just a general feeling of slackness which makes me think it needs to have all its bolts
undone and done back up again, bushes and engine mounts replaced, tune the suspension properly etc. In fact I’ve just bought another car (an
Alfasud) to replace it in the commuting duties while it’s off the road. Though something tells me I might end up spending more time working on that
than the VW...
My main focus is on making it into a better (well, better than it is already) commuter car, and, in the spirit of the way cars are heading these days
I want to try to pay attention to fuel efficiency rather than increasing power. At the moment I’m getting a pretty constant 8.5 litres/100kms –
which is already pretty good – but I’m toying with the idea of improving that figure both by making the engine more efficient and by getting
weight down – if that’s possible.
I just bought an SVDA distributor from aircooled.net which I’m getting fitted next week, just to test it out. To be honest I haven’t decided
whether to plunge into a full engine rebuild as it’s already running well and the old “if it ain’t broke don’t fix it” comes to mind, but it
strikes me that things like raising the compression and paying attention to gas flowing might make a big difference – though I’d still like to
keep it at 1300cc for efficiency reasons and would prefer to keep the original-spec carb if possible, just for the sake of keeping a few links to the
past.
And the bodywork? Well it looks like a piece of crap, but I’m going to leave it that way for the moment. Firstly I don’t have the money to get
that side of things right, and actually I’m sort of interested in the idea of rat-rodding…but also because my girl has a bit of a thing for
Karmann Ghias. She’s only recently got her license but as soon as she’s developed her driving skills a bit we’re going to start looking for one,
and we’ll then have the option of transplanting the by-then developed engine from the Beetle into the Ghia.
But, after that long-winded intro, basically I’m interested in connecting with people who might also have gone down the path of trying to build a
Type 1 engine for efficiency and driveability, rather than outright power, and to share experiences.
So, pleased to meet you!
Nobody ever says Ftumpch...
|
|
|
Paulc1964au
Custom Title Time!
Posts: 1627
Threads: 59
Registered: March 5th, 2010
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 22nd, 2011 at 02:40 PM |
|
|
welcome to the forum I'm impressed you like your Vw over the Jaguar. i am also in sydney and modifying my 69 beetle there is a link to my thread
below.
look forward to seeing more of your updates.
|
|
|
Camo
A.k.a.: Kev
Custom Title Time!
Posts: 1936
Threads: 209
Registered: October 29th, 2007
Member Is Offline
Location: Sydney - Liverpool area
Theme: UltimaBB Pro Blue
|
| posted on July 26th, 2011 at 08:25 AM |
|
|
Welcome and a good read of your transformation from a Jag to VW, made me smile.
Just reading through your thread and a few things popped into mind. Firstly I can only dream about a car that would only use 8.5L per 100kms OMG. My
car is stock standard and uses an average of 16.5L per 100, but it is a 6L V8 Commodore and the wife's uses about 14L / 100, a 4WD lol. So I would
not be complaining about 8.5l / 100 unless you are on the doll.
Also, you talk about not having enough money to do up the Beetle body work and I fully understand and accept that, but I must ask how do you think you
will have enough to buy and fix up a Karman Ghia. I think they are more expensive.
I am not trying to knock you at all, just pointing out a few things for you to think about. I love the fact that you are enjoying the VW so much and
give you credit for wanting to improve it. But I think you will find if you raise the compression and get the engine flowing better, it will use more
fuel ( I may be wrong ) and others can add their thoughts.
I'm also in Sydney (Liverpool area) if you need a hand with anything, so welcome to the forum and to Sydney.
Good luck with your plans and just ask on these forums and there will be a lot of will helpful information.
Regards, Kevin
P.S. I like the comment and think there may be some truth in it about working on the Alfa more than the Beetle 
|
|
|
cam070
Custom Title Time!
Posts: 1332
Threads: 53
Registered: July 25th, 2009
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Getting hands dirty stripping the bug down
|
| posted on July 26th, 2011 at 01:24 PM |
|
|
Welcome to the forum and its like music to me ears selling a Jag, with the chorus being to drive a VW.
The good thing is there are a load less parts to replace on a bug compared to an XJR and all are probably a lot cheaper.
If you are after cheap mods to make it run a bit better/more efficiently, maybe a new exhaust to get rid of those nasty burnt bits more easily.
However, not sure getting an Alfa was a great idea. I have a feeling you will be sinking some finds into that as they are notoriously unreliable.
From a fellow Sydney bug owner (as mine is ureg ATM)
|
|
|
Ftumpch
Learner Dubber
Posts: 6
Threads: 2
Registered: July 22nd, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 2nd, 2011 at 11:13 AM |
|
|
G'day all and thanks for the replies,
Well it's true that the Alfasud is still sitting immobile in the driveway while I'm tracking down the necessary parts to get it on the road again...
My first car was a 'sud so I'm pretty familiar with their quirks. They're great fun and my old one was completely reliable if looked after
properly, but it's true that the parts supply for these car has dried up a bit in the ten years since I last looked!
Meanwhile the Beetle is still going strong but every time I drive it I find myself thinking about all the things I'd like to do to it to make it even
better! And after about a year of this sort of musing it's got to the point where I can't resist any more. Unfortunately the new dizzy's not in yet
- I took it to the bloke who services my girlfriend's Benz but he had a good look and decided he'd better not attempt it, so I've got it booked in
to a VW specialist in brookvale next week. SoI'll let you know how that goes, but I'll only have 3 days to test it out before it runs out of
rego;(
And the bodywork, well my approach to that is that there's no point doing it unless it can be made perfect. Trouble is that every single panel has at
least one dent and/or rust spot in it, and the paint's no good, so I'm thinking it will probably cost more to fix than the car's worth. So I'll
probably just treat the rust and leave it as is, because beetles in a delapidated state look pretty good I reckon. Though depending on how much time I
have I might just use this as an opportunity to teach myself panel beating... I've always liked the idea of painting a car in matt silver - ie the
same kind of finish that was used on the early jet fighter planes: Sabres, Meteors, Vampires etc - And I'm thinking that with a spraygun and a whole
lot of newspaper lining the garage I could probably achieve something similar.
So thanks again, and I'll keep you posted
Nobody ever says Ftumpch...
|
|
|
Ftumpch
Learner Dubber
Posts: 6
Threads: 2
Registered: July 22nd, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 17th, 2011 at 12:52 PM |
|
|
Further developments: I had the SVDA distributor fitted last week, along with a proper tune-up. What I am finding is that every time I drive the car
it seems to get better and better - and aircooled.net does advise that the vacuum diaphragm in the dizzy takes up to three months to bed in
properly.
I wouldn't call it a dramatic transformation but the engine is certainly much smoother. Throttle response is better and there seems to be a little
more torque, in the sense that it holds its speed up hills a bit more, though the tune-up also identified worn throttle spindles and other associated
bits so I'm going to reserve judgement until I get the carb rebuilt. Haven't had the chance to work out whether fuel economy has improved yet.
The other factor is that the tappets were reset. I forgot to ask the guy what gap he used... but I remember when I first got the car the tappets were
butting right up against the springs with no gap whatsoever, and at the time I reset the gap according to the figure in the workshop manual (can't
remember what that was...). This resulted in a bit more torque, especially at low revs, but also caused a hell of a lot more noise. After the recent
work the noise has gone completely.
So I just wanted to ask, does anyone have experience on the best tappet gap to use, and whether there are any tricks to extract more power/efficiency
vs produce quieter running?
Cheers
Nobody ever says Ftumpch...
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
 posted on August 17th, 2011 at 12:59 PM |
|
|
well .016" is the gap most people use...
as recommended by VW...
However the tappets NEED to be done frequently...
I usually do mine every 1000klms at the oil change..
I also had a noisy engine and lost a bit of power but after doing the tappets ... quieter and engine went much better..
tappets were tight.. I hadn't done the tappets for about 3000klms.. was too cold.... lol
SVDA distributor is now working great...
and also seems to go better and better...
can now accelerate slightly up hills that I lost speed on before
LEE
always do tappets when cold... .016"
[16 thousands of an inch]
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on August 17th, 2011 at 01:05 PM |
|
|
Ok on the move from Jag to VW... smart move..
VW to alfasud... not good . lol
make sure You do have metal all around You as these cars do rust away...
and can cause problems mechanically... lol
Karmann Ghias are nice... but being Hand made ..
and the body etc entirely different to a beetle...
VERY EXPENSIVE to repair bodywork etc...
widened VW chassis uses VW Beetle componets... OK..
cheers
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
Ftumpch
Learner Dubber
Posts: 6
Threads: 2
Registered: July 22nd, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 19th, 2011 at 03:21 PM |
|
|
Thanks for that Lee,
Well at least the 'Sud is a four-cylinder boxer so it's gotta have something going for it! I like them, and I need at least two cars at a time to
keep me sane!
Nobody ever says Ftumpch...
|
|
|
Anthiron
A.k.a.: Nicko McKay
Compulsive Aussie Vee Dubber
The Baja Rejuvenation Begins
Posts: 4936
Threads: 310
Registered: October 1st, 2003
Member Is Offline
Location: Buderim QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: Hell hath no fury like a womans scorn for sega.
|
| posted on August 19th, 2011 at 04:21 PM |
|
|
Um ......Just to chime in.... The tappets should be set to .006" or .15mm
Sorry Lee im sure it was just a typo on your behalf but I didnt want Ftumpch to adjust them wrong.
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
|
|
|
h
A.k.a.: Towely BuMpEr KING! ILLegal ALIEN on a roadtrip
Scirocco Rare
fractals - an ever changing lifestyle
Posts: 7670
Threads: 375
Registered: February 3rd, 2005
Member Is Offline
Location: noosa hillbilly 'yee har'
Theme: XMBX Pro Green
Mood: A T3 is not a Kombi - stop waving at me
|
| posted on August 19th, 2011 at 04:22 PM |
|
|
welcome to here
good read ^
cheers pauly
|
|
|
Aussie Dubbin
Fahrvergnugen
Posts: 895
Threads: 90
Registered: July 21st, 2008
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 19th, 2011 at 06:06 PM |
|
|
could you look at replacing just the piston rings if you are worried about compression? You could hone while out too . Power often comes with fuel use
good luck
|
|
|
 helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on August 19th, 2011 at 06:52 PM |
|
|
If you have the ignition nicely sorted, that is a major part of smooth running. The distributor, leads, plugs and coil all done
The carby must be working well, fuel pump and filter etc. Change your fuel gauge sender in the tank and all is well.
The motor runs well, smooth and idling well. I would not touch it, just keep up the 5000 mile maintenance of new oil, strainer clean and gasket, and
tappet adjustment.
The simplest change you can make if your exhaust is not looking good. Get a good quality muffler, and real good quality pipes. We had cheap chirpy
chirpy pipes that rusted in 3 months on our 1300, and when I got a pair of German stainless steel pipes, the sound was a nice horizontally opposed
engine rumble, and after 6 years no rust.
We are not trying to make a huge power Beetle, but a smooth runner. If it is a stock engine, you will gain nothing by running it on anything but
Unleaded 91.
|
|
|
grumble
Son of Jim - Creator of Good
Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
| posted on August 19th, 2011 at 07:32 PM |
|
|
| Quote: | Originally
posted by Anthiron
Um ......Just to chime in.... The tappets should be set to .009" or .15mm
Sorry Lee im sure it was just a typo on your behalf but I didnt want Ftumpch to adjust them wrong.
|
Nicko 0.1mm= .004" Tappet clearance is .006" or 0.15mm
You may have hit the 9 instead of the 6.
|
|
|
Anthiron
A.k.a.: Nicko McKay
Compulsive Aussie Vee Dubber
The Baja Rejuvenation Begins
Posts: 4936
Threads: 310
Registered: October 1st, 2003
Member Is Offline
Location: Buderim QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: Hell hath no fury like a womans scorn for sega.
|
| posted on August 19th, 2011 at 09:44 PM |
|
|
jesus my bad. Here i am correcting someone and I cant even type. .006 indeed
62/60 model bug eye baja bug, (Full Build in Progress)
1974 Chevrolet Luv
1970 MK2 Ford Cortina GT
1979 Yamaha RX125 Two Stroke tracker project.
2004 Harley Davidson Sportster XL Custom
|
|
|
