Board Logo
Go To Bottom

Printable Version  
[ Total Views: 1022 | Total Replies: 5 | Thread Id: 92697 ]
Author: Subject:  snapped throttle cable - Gold coast parts shops?
MemberLdog
Commited Dubber
**


No Avatar


Posts: 70
Threads: 19
Registered: May 23rd, 2011
Member Is Offline

Theme: UltimaBB Pro Orange
Mood: insomnia

info.gif posted on September 17th, 2011 at 08:07 AM
snapped throttle cable - Gold coast parts shops?


Hi guys broken down on the gold coast and need a new throttle cable.

Any body Know where I can go on a saturday here to get one?

Cheers




1915,c95,44's,44x37.5,NA, DuBwAy
Super Administratorvw54
Super Administrator
Always Waiting 4 Friday
*********

Rank Avatar

No Avatar


Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline

Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing

posted on September 17th, 2011 at 08:33 AM



probally Gold Coast VW Jack Juni 5537 6200



Member68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
**********


Avatar


Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline

Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -

yes.gif posted on September 17th, 2011 at 02:53 PM



Quote:
Originally posted by Ldog
Hi guys broken down on the gold coast and need a new throttle cable.

Any body Know where I can go on a saturday here to get one?

Cheers


Hi
the throttle cable [which I have a few spares] usually always snaps off near the carburetor...
Go to an electrical shop- dick smiths- KMart etc and buy a packet of large electrical connectors..
these are made to join two large wires together [in a house not in a car] You stick both wires in the open end and screw in the two grubscrews...

Now take one of those connectors out of the packet...
screw the two grubscrews out...
take the plastic cover off and throw it away...
screw the two grubscrews in slightly

now You will have a round brass piece with two grub screws and threads...
push one end of the connector onto the end of the accelerator cable and from the other side push in a piece of stiff wire like a coat hanger wire...
then tighten both grubscrews...

cut the coat hanger wire to about 4 inches 100mm and slide it thu the accelerator linkage piece in the carby..
if that piece has dropped out...
just wrap the coat hanger wire around the carby arm...

now drive away...

cheers

LEE

I will post pics later




- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
MemberLdog
Commited Dubber
**


No Avatar


Posts: 70
Threads: 19
Registered: May 23rd, 2011
Member Is Offline

Theme: UltimaBB Pro Orange
Mood: insomnia

posted on September 18th, 2011 at 09:24 AM



cheers guys Went to the scrappy and found some wire and fabed one up should get me back home !!!

thanks for the advivce im guna carry a spare now!!!




1915,c95,44's,44x37.5,NA, DuBwAy
Member68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
**********


Avatar


Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline

Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -

info.gif posted on September 18th, 2011 at 12:49 PM



Quote:
Originally posted by Ldog
cheers guys Went to the scrappy and found some wire and fabed one up should get me back home !!!

thanks for the advice im guna carry a spare now!!!


Hi
You can actually buy a repair kit which has a round piece of steel in two thicknesses
one the size of carby throttle wire and the other the thick bit on the end of the carby wire .. [bit that snaps off]
and a clamp similar to the one I described..

so You can fix the cable without going to the trouble of replacing the complete cable...

Kit or cable are similar in price... lol

actually the large piece crimped on the end of the cable wouldn't snap off it was just a few mm long and ONLY right at the end of the cable

cheers

LEE




- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
MemberOZ Towdster
A.k.a.: Andrew Westwood
Custom Title Time!
Keen to finish some projects
*****


Avatar


Posts: 1921
Threads: 132
Registered: December 7th, 2003
Member Is Offline

Location: Alexandra Hills Brisbane QLD
Theme: UltimaBB Pro Yellow
Mood: Having fun in our great land

posted on September 18th, 2011 at 05:44 PM



Micks also sells a combination cable that has a few pieces to make it fit anything from a 2lt Kombi to a beetle



Don't let body work get in the way of real suspension travel


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 1.1% - SQL: 98.9% ]