| [ Total Views: 668 | Total Replies: 3 | Thread Id: 94187 ] |
|
|
 Aussie Dubbin
Fahrvergnugen
Posts: 895
Threads: 90
Registered: July 21st, 2008
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 7th, 2011 at 12:26 PM |
|
|
6 point harness mount - Crutch strap mounting
Hi Guys,
i'm looking at where to mount the crutch strap underneath my seat. There is two straps and it needs to be 20* front or rear of the crutch hole. It
needs to be mounted using 8.8 eye-bolt and nut and there needs to be a 75x50x3mm plate on the underside of the chassis.
I have all of them above. BUT - the 75x50 plate is too big for any of the indentations in the floorpan under the seat... what have you guys done? What
is a suitable way to have cams on board? do i drill a hole inbetween two indententations to sperad the load, weld some spacers into where the indents
go? I dont have a pic at the moment but you get the idea i'm sure. i imagine cams dont want the plate to have big hollows between 3mm plate and
chassis floor.
Cheers if you can help
|
|
|
Aussie Dubbin
Fahrvergnugen
Posts: 895
Threads: 90
Registered: July 21st, 2008
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 7th, 2011 at 12:29 PM |
|
|
Here is a pic of my seat mount there are two 100x50x2mm RHS tubes that run underneath the rails
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on December 8th, 2011 at 10:03 AM |
|
|
Really need to speak to a engineer as it will have to be approved anyway, i fitted my harrnesses and he made me change one mounting point.
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on December 8th, 2011 at 10:08 AM |
|
|
bend it to suit the floor contour !
|
|
|
