| [ Total Views: 4018 | Total Replies: 62 | Thread Id: 94407 ] |
| Pages: 1 2 3 |
|
|
 cnfabo
Custom Title Time!
Posts: 1353
Threads: 140
Registered: April 15th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 20th, 2011 at 02:39 PM |
|
|
hard lines for external oil cooler ?????
hi guys n girls,
i just purchased myself a rx7 oil cooler to be mounted up the front.
.now what do i use for hard lines,copper,alloy,what?? i just looked at some copper for $30 for 6 mtrs "cheaper then flexi lines" , but i think you
can get different grade copper pipes....
so what's reconmended...
thanks
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on December 20th, 2011 at 02:48 PM |
|
|
I've only heard of using copper pipe..
whether its the heavy duty straight pipe or the usual water copper pipe that is sold by the roll...??
but the copper pipe also helps cool the oil down as it flows thru it...
no corrosion problems in Australia...
Lee
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8621
Threads: 556
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on December 20th, 2011 at 03:35 PM |
|
|
Hi
I've always used 1/2 rubber without any issues.
Steve
|
|
|
hellbugged
A.k.a.: Daimo Pell
23 Windows of Awesome
48's and straight cuts
Posts: 5079
Threads: 116
Registered: April 17th, 2003
Member Is Offline
Location: Nambucca Valley NSW
Theme: UltimaBB Psyche Blue
Mood: Couldn't care less
|
| posted on December 20th, 2011 at 04:08 PM |
|
|
ive used copper pipes on several cars and braze on barbed fittings....but yes seen rubber used plenty of times as well.
be sure to use a oil thermostat and even better, a berg pressure relief pump cover too!....way to easy to blow off the lines when oil temps cold
without these
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on December 20th, 2011 at 06:02 PM |
|
|
buy the RED ( pink ) Rubber hose from Pirtek
Its the BEST has a thick wall not cheap but really good
been using it for over 10 years
Make sure you fit an inline thermostat
|
|
|
bigrudi
Wolfsburg Wizard
Posts: 401
Threads: 118
Registered: April 12th, 2005
Member Is Offline
Location: Sydney, Australia
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 20th, 2011 at 06:13 PM |
|
|
Real steel tube theres no substitute when u head into the gravel trap at 180ks and rocks sandblast it
|
|
|
BiX
Veteran Volks Folk
Posts: 2499
Threads: 154
Registered: September 2nd, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 20th, 2011 at 06:15 PM |
|
|
I use a combination of steel and rubber. To allow some movement between the engine and fixed mounted fileter and cooler.
I have no sympathy for my car, only the wallet that pays for it!
Go hard or go home!!!!
|
|
|
cnfabo
Custom Title Time!
Posts: 1353
Threads: 140
Registered: April 15th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 20th, 2011 at 09:04 PM |
|
|
thanks guys...
i think ill use the copper lines with the push lock hose and yes im running a thermostat.as for pump ill be using cb's shadeck maxi 30 pump..thanks
again boys.
merry xmas.....
|
|
|
Jak Rizzo
Insano Dub Head
Posts: 837
Threads: 67
Registered: April 26th, 2004
Member Is Offline
Location: Central Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: Pastizzi eating
|
| posted on December 21st, 2011 at 06:01 AM |
|
|
I would reccomend that u don't bother mounting it up front. i used an RX7 oil cooler as well on my beetle engines, I mounted mine above the gearbox
to the underside of the parcel tray, it was out of harms way & was more than good enough to keep the oil cool.
Doing lap after lap at Eastern Creek with the last 2275cc engine I built, the oil temp wouldnt' go over 100d, with no fans or ducting going to the
oil cooler. I also always ran the standard doghouse cooler as well.
Hope this helps
regards
Jak
|
|
|
HappyDaze
A.k.a.: Greg Mackie
Son of Jim - Creator of Good
Superannuated
Posts: 2887
Threads: 141
Registered: June 13th, 2009
Member Is Offline
Location: Southern Highlands NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy enough
|
| posted on December 21st, 2011 at 07:22 AM |
|
|
I agree with Jak. ^
I'd rather wear a Beetle out by racing it than by polishing it!
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on December 21st, 2011 at 07:26 AM |
|
|
^^^ me too 
For fuel/oil hard lines the correct tube is 5052 Aluminium.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
cnfabo
Custom Title Time!
Posts: 1353
Threads: 140
Registered: April 15th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 21st, 2011 at 11:27 AM |
|
|
doh now im confused on what to do....i have a 12 row cooler i have used for years that's mounted near the torsion bar housing which is good for
4x70-80 second laps on a 30deg but any more laps then that or hotter temps the oil starts to rise to 120 or so .
when i give myself my rx7 cooler for chrissy ill go see how it will fit above the gearbox...and besides shorter hoses = less oil to change.yay....
|
|
|
sander288
Custom Title Time!
"Bolt-on Master"
Posts: 1404
Threads: 183
Registered: August 26th, 2008
Member Is Offline
Location: Norman Park, QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: This is my bug. There are many others like it, but this one is mine.
|
| posted on December 21st, 2011 at 01:22 PM |
|
|
| Quote: | Originally
posted by vw54
buy the RED ( pink ) Rubber hose from Pirtek
Its the BEST has a thick wall not cheap but really good
been using it for over 10 years
Make sure you fit an inline thermostat
|
Just checked Pirtek's website, and these hoses are good for 61.5 bar (890psi) before they will burst!
|
|
|
hellbugged
A.k.a.: Daimo Pell
23 Windows of Awesome
48's and straight cuts
Posts: 5079
Threads: 116
Registered: April 17th, 2003
Member Is Offline
Location: Nambucca Valley NSW
Theme: UltimaBB Psyche Blue
Mood: Couldn't care less
|
| posted on December 21st, 2011 at 06:41 PM |
|
|
Yeah just remeber Jak is in a 1302 with all the extra benefits of their evolved cooling
Boot vents etc
Just do what needs to be done to keep YOUR temps under control....motors ain't cheap
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8621
Threads: 556
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on December 21st, 2011 at 07:47 PM |
|
|
Hi
The only problem that I can see with using hard lines is that if they get squashed they stay squashed, rubber lines bounce back or rips.
I fitted a front mounted oil cooler to my WBX bug using pink Pertec lines. I have now fitted this same cooler and lines to my sons 1904cc bug, it has
no internal cooler just the front mount, doesn't overheat no matter what you do, flat out on a freeway or stuck in Sydney traffic, most of the time
its just above the thermostat opening temperature.
If you want to do ghetto fittings for the RX7 cooler, the breather hose fitting on late model bug fuel fillers is the same thread just weld some 1/2
tubes into them, I think that you can buy them nowadays from fitting places
Steve
ps Jak has a 1302, they still had the small vents under the window, the 1303 got the bigger vents
|
|
|
mactaylor
Custom Title Time!
Posts: 1005
Threads: 54
Registered: August 14th, 2007
Member Is Offline
Location: Albury
Theme: UltimaBB Pro Blue
Mood: even my dog is german
|
| posted on December 22nd, 2011 at 03:46 AM |
|
|
agree with mat use ally pipes better heat dissapation you can weld on AN fittings and make the system neat with hydraulic clamps from any hose mob.
Also try to use a slightly bigger pipe as the bigger pipe is easier to pump through even if you have a restriction at the end.
EVERLAST CONCRETE TANKS
1800 552 123
|
|
|
bigrudi
Wolfsburg Wizard
Posts: 401
Threads: 118
Registered: April 12th, 2005
Member Is Offline
Location: Sydney, Australia
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 26th, 2011 at 10:02 PM |
|
|
120 deg aint that hot have run them past 150 with good oil and had no probs [pre oil cooler days)
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on December 26th, 2011 at 10:41 PM |
|
|
Heard today that copper has problems when used with diesel or petrol, with diesel has a reaction creating a green corosion with the sulpfur, so makes
me womder if sump oil has anything that may create 'issues'.
Not sure I agree that your 150* oil temps are 'ok' Rudi.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
cnfabo
Custom Title Time!
Posts: 1353
Threads: 140
Registered: April 15th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 27th, 2011 at 08:57 AM |
|
|
yeah 150 geez,melt down.a gauge that reads more then it is ??
|
|
|
amazeer
A.k.a.: Surly Duff
Bishop of Volkswagenism
Posts: 3029
Threads: 387
Registered: November 14th, 2005
Member Is Offline
Location: Wollongong
Theme: UltimaBB Pro Blue ( Default )
Mood: bitter
|
| posted on February 1st, 2012 at 11:18 PM |
|
|
Use steel lines. Silver solder an olive to the ends of the tube to be your pseudo hose barb. Mounted mine with stauff clamps.
if you are looking at the different cooling potential of the lines to solve a problem, reckon you are screwed.
|
|
|
PAZZAN
Wolfsburg Wizard
Posts: 592
Threads: 113
Registered: January 30th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue
|
| posted on February 2nd, 2012 at 04:01 PM |
|
|
I used copper lines no problems at all one down either side of the
car in the channel where the body bolts are ,safe there....
|
|
|
mactaylor
Custom Title Time!
Posts: 1005
Threads: 54
Registered: August 14th, 2007
Member Is Offline
Location: Albury
Theme: UltimaBB Pro Blue
Mood: even my dog is german
|
| posted on February 2nd, 2012 at 04:36 PM |
|
|
| Quote: | Originally
posted by amazeer
Use steel lines. Silver solder an olive to the ends of the tube to be your pseudo hose barb. Mounted mine with stauff clamps.
if you are looking at the different cooling potential of the lines to solve a problem, reckon you are screwed.
|
Dunno bout that, as any help is worth the work. never discount the "free" benefits of the right material selection!
EVERLAST CONCRETE TANKS
1800 552 123
|
|
|
Turbo54
Veteran Volks Folk
Posts: 2220
Threads: 268
Registered: July 13th, 2004
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
Mood: Boost'n
|
| posted on March 6th, 2012 at 11:58 AM |
|
|
So is above the gearbox the place to mount one. I have a turbo street car in the build and it is going to be driven hard. I was thinking last night
while looking at it to mount it under the parcel shelf but not flat up under it but at 90 degrees to it facing out close the rear rear shock. Anyone
done this or have any idea if it would be better than tucking it away?
Thanks
HEath
C'mon kids gather round,
there's a new sensation hitting town,
It's moving straight, low to the ground,
it'll pick you up when your feeling down.
|
|
|
cnfabo
Custom Title Time!
Posts: 1353
Threads: 140
Registered: April 15th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 6th, 2012 at 02:59 PM |
|
|
ill let u know how mine goes above the gearbox in a few weeks
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8621
Threads: 556
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on March 7th, 2012 at 07:34 AM |
|
|
Hi
How much airflow will you get above the gearbox? Not much, if you can mount it at the front.
Steve
|
|
|
Turbo54
Veteran Volks Folk
Posts: 2220
Threads: 268
Registered: July 13th, 2004
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
Mood: Boost'n
|
| posted on March 7th, 2012 at 08:30 AM |
|
|
Thanks Steve,
Obviously that would be the best place for it but I have a radiator already there.
This is why I was thinking of trying to make it more upright that flat against the luggage area.
T54
C'mon kids gather round,
there's a new sensation hitting town,
It's moving straight, low to the ground,
it'll pick you up when your feeling down.
|
|
|
cnfabo
Custom Title Time!
Posts: 1353
Threads: 140
Registered: April 15th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 7th, 2012 at 09:17 AM |
|
|
im going to use some ducting
|
|
|
cnfabo
Custom Title Time!
Posts: 1353
Threads: 140
Registered: April 15th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on April 6th, 2012 at 05:22 PM |
|
|
i ended up mounting my cooler above the gearbox and the oil is getting a lot hotter then previous.i do now have a wilder engine which will make things
a tad hotter but still my oil is getting 110deg where before with my old setup would sit at 90deg.so i think im going to mount it up front...
does anyone know if cams allow to run lines inside the cabin ??
|
|
|
hellbugged
A.k.a.: Daimo Pell
23 Windows of Awesome
48's and straight cuts
Posts: 5079
Threads: 116
Registered: April 17th, 2003
Member Is Offline
Location: Nambucca Valley NSW
Theme: UltimaBB Psyche Blue
Mood: Couldn't care less
|
| posted on April 6th, 2012 at 06:03 PM |
|
|
Hows the new donk feel?
|
|
|
cnfabo
Custom Title Time!
Posts: 1353
Threads: 140
Registered: April 15th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on April 6th, 2012 at 07:09 PM |
|
|
more power have not done any power runs yet,i have taken it to
6000rpm a couple of times and still have another 2000 to go...it really starts pulling from 4000.......still trying to jet the thing ....so far it
wants bigger idles then 60's with the 48mm webbers....im not yet sold on that size carb and might bolt on my old 44's and see how it runs....
|
|
|
| Pages: 1 2 3 |
