Posts: 84
Threads: 35
Registered: July 2nd, 2009
Member Is Offline
Location: Maitland, NSW
Theme: XMBX Pro Green
posted on April 7th, 2012 at 09:03 AM
IRS conversion
Hi All
I'm doing the IRS conversion on my Baja and read somewhere that the pivot brackets should be setup at a certain angle from the horizontal plane.
Anyone know of this? Something like 10 or 11 degrees. Just interested in checking it when setting them up.
BTW I'm using a brought irs jig.
Smiley
A.k.a.: Daniel Stephens
Veteran Volks Folk
Posts: 2125
Threads: 110
Registered: October 29th, 2008
Member Is Offline
Location: Yeppoon, Central Queensland
Theme: UltimaBB Pro Blue
Mood: Synchro'd
posted on April 7th, 2012 at 10:15 AM
If you are using an IRS jig then you should just bolt the jig on and the pivot box should be in the correct position.
Can you post a picture of what you're doing?
Smiley
If you said I was a Volkswagen man, you'd be right.
Smiley
A.k.a.: Daniel Stephens
Veteran Volks Folk
Posts: 2125
Threads: 110
Registered: October 29th, 2008
Member Is Offline
Location: Yeppoon, Central Queensland
Theme: UltimaBB Pro Blue
Mood: Synchro'd
posted on April 7th, 2012 at 10:16 AM
Also, here's a good little thread with a few pictures to follow.
