Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
posted on June 11th, 2012 at 10:23 PM
Just in case anyone was wondering the machined groove in the 6v flywheel seems to be working. time will tell if the O ring has enough purchase to stop
the oil leaking.
Cheers for all the help
madness is in the eye of the beholder
Lucky Phil
Wolfsburg Wizard
Posts: 480
Threads: 16
Registered: August 1st, 2010
Member Is Offline
Location: Adelaide SA
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm a legend in my own lunchtime!
posted on June 11th, 2012 at 10:49 PM
Crikey, what an evolution!
Hope it works.
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
posted on June 12th, 2012 at 01:30 AM
Quote:
Originally
posted by Lucky Phil
Crikey, what an evolution!
Hope it works.
Yea, what's even funnier tho is that the machinist took a bit off the inside face of the flywheel so the new shims I bought were too much and I ended
up using the old shims. I may have been able to use the metal gasket with the new shims but the old ones came up at 0.1mm so spot on
