| [ Total Views: 1146 | Total Replies: 5 | Thread Id: 96692 ] |
|
|
 karmad
Casual Dubber
Posts: 30
Threads: 11
Registered: June 10th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on May 1st, 2012 at 07:02 AM |
|
|
HELP NEED UNSTEADY IDLE
Hi lads,i need some help with this .I lowered the sump and stuck it back on and noticed it didnt seal properly so its leaking a bit and toady i
started it and its not idling properly.Im not sure if these 2 problems are connected or not and cant figure it out .Any advice lads? HAVE A LISTEN
|
|
|
Shuffs
Commited Dubber
Posts: 50
Threads: 3
Registered: August 20th, 2010
Member Is Offline
Theme: UltimaBB Pro Purple
|
| posted on May 2nd, 2012 at 07:56 AM |
|
|
I'm going to bump this in the hope that one of the Subie guys reads it.To me it sounds like you have a dirty sensor,Air flow,maybe.I cannot see any
reason why it would be related to dropping the sump off,unless you've knocked a wire off in the process.Normally that 'hunting' idle will go away
with a bit of driving,but if it is 'a work in progress' the sensor may just be carboned up.
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on May 5th, 2012 at 11:47 AM |
|
|
you will have a plug not correctly fitted or air flow meter needs to be cleaned.
also remove the ICV and clean it out, mark it so you put it back in the same place
Looking for that special lady : PM me for coffee & cake
|
|
|
pete wood
A.k.a.: figure itout
23 Windows of Awesome
Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline
Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands
|
| posted on May 7th, 2012 at 07:52 PM |
|
|
hey seagull. what would clean the air flow meter with?
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on May 7th, 2012 at 08:58 PM |
|
|
I've always used that CRC electrical contact cleaner.
|
|
|
flat_iv
Seriously Crusin Dubber
Posts: 107
Threads: 28
Registered: May 11th, 2005
Member Is Offline
Location: Tennessee, USA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on May 8th, 2012 at 04:45 AM |
|
|
That sounds just like mine was doing when I was testing everything. I had a leak between the air flow meter and the throttle body. Hope this helps.
|
|
|
