Board Logo
Home Home  Frequently Asked Questions FAQ  View Topic Activity Topic Activity  Forum Stats Stats  Contact Us Contact Us  Banners Banners
Last active: Never Not logged in [ Log In - Register ]
Aussieveedubbers Navigation Symbol Tech Mods and Frequently asked Questions Navigation Symbol 72 Type 3 front disc calipers Go To Bottom

Printable Version  
[ Total Views: 1097 | Total Replies: 3 | Thread Id: 97362 ]
« View Previous Thread View Next Thread »
Author: Subject:  72 Type 3 front disc calipers
Memberbinner
Fahrvergnugen
****

Avatar


Posts: 981
Threads: 210
Registered: January 19th, 2010
Member Is Offline

Location: Brisbane
Theme: UltimaBB Streamlined2
Mood: want more grunt

posted on June 10th, 2012 at 09:39 PM
72 Type 3 front disc calipers

A quick question....
Are type 3 disc calipers the same as kombi lowlight front disc calipers?

thanks in advance Binner



71 SQ
Member1303Steve
A.k.a.: Steve Carter
Scirocco Rare
*********

Avatar


Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline

Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading

posted on June 10th, 2012 at 10:20 PM



no
Memberbinner
Fahrvergnugen
****

Avatar


Posts: 981
Threads: 210
Registered: January 19th, 2010
Member Is Offline

Location: Brisbane
Theme: UltimaBB Streamlined2
Mood: want more grunt

posted on June 10th, 2012 at 10:27 PM



^^^^^ thank you. :tu:



71 SQ
MemberVanders
Seriously Crusin Dubber
**

Avatar


Posts: 125
Threads: 28
Registered: November 13th, 2006
Member Is Offline

Location: Launceston, TAS
Theme: UltimaBB Pro Grey

posted on June 11th, 2012 at 07:14 PM



Also note there are two different calipers for type 3's. Until halfway through 71 the calipers were smaller and had less spacing between the two mount holes. From then until the end (including 72) the calipers have a wider spacing between the bolt holes (approx 3 inches) are physically larger, have 2 bleed screws per caliper and take different pads. They are also rare as rocking horse poo and I was quoted $700 for a new pair, but I doubt they new the difference between the two type 3 calipers. If you want to change to the smaller, more available earlier model you also have to change stub axels and backing plates. Rock and a hard place. I ordered a pair of rebuilt late Type 3 from the US:

http://vwparts.aircooled.net/Front-Disc-Brake-Caliper-Left-1971-73-VW-Type-3-...

and

http://vwparts.aircooled.net/Front-Disc-Brake-Caliper-Right-1971-73-VW-Type-3...

The standard ones are interchangeable left or right because of the two bleed screws, but these only have one screw, so have to be matched to the side. hope this helps. Are you trying to put kombi calipers on a type 3 or vice versa?



1972 Type 3 Kit Car - "Marauder"

http://www.paulsweb.info/marauder


 Aussieveedubbers Navigation Symbol Tech Mods and Frequently asked Questions Navigation Symbol 72 Type 3 front disc calipers   Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 8.9% - SQL: 91.1% ]