Board Logo
Go To Bottom

Forum Rules
New guidelines are in place as of 15/1/2014. Please review here:

http://forums.aussieveedubbers.com/viewtopic.php?tid=104733 

Printable Version  
[ Total Views: 1095 | Total Replies: 3 | Thread Id: 97801 ]
Author: Subject:  F/S, 1641cc Type 1 engine
MemberJonR356
Casual Dubber
*


Avatar


Posts: 24
Threads: 4
Registered: August 11th, 2010
Member Is Offline

Location: NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Optimistic

posted on July 12th, 2012 at 03:17 PM
F/S, 1641cc Type 1 engine


I'm selling a 1641 twin port type 1 motor. It's a reconditioned motor built by Remtec in the UK. These are built with new heads and a reconditioned crankcase, crank. It's done less than 15K kilometres and is in great condition.

Internally standard except for a Scat C25 cam. It comes with a pair of 36 Dells on a CB performance linkage with CB filters, a Bosch 009 distributor with a Pertronix module, bolt on rocker covers, clutch, a Bugpack hideaway exhaust on a small flange header in ceramic coat, and heat exchangers.

You will need to add your own tinware, alternator, stand and fuel pump.

Mike at CBB tuned this on his dyno, and it produced 52.6 HP at the wheels. I can provide a copy of the dyno chart and pics of the motor for anyone serious. The engine is out of the car now, but Mike is happy to take a call to confirm it's in good condition and runs great.

I'm looking for $2K, which I think is a good price when you add up the cost of the carbies, linkage, exhaust etc.

Based in Gordon, up near Hornsby NSW, happy to deliver if close by.

Send me a PM if you're interested.
MemberDibsy
Seriously Crusin Dubber
**


Avatar


Posts: 182
Threads: 37
Registered: April 13th, 2012
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on July 12th, 2012 at 04:15 PM



PM Sent :cool:
MemberJonR356
Casual Dubber
*


Avatar


Posts: 24
Threads: 4
Registered: August 11th, 2010
Member Is Offline

Location: NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Optimistic

posted on July 13th, 2012 at 08:08 AM



Thanks to everyone who's sent me a pm. To be fair, I'm just going to work through in order til someone buys it.

Just had a look at the motor this morning, and it also needs a dissy cap, plug leads and the oil cooler. So pretty much all the ancillaries except clutch, exhaust, carbies, distributor body and linkage.

Perfect if you've already got ancillaries. No bad thing to be fitting new plug leads and dissy cap anyway.
MemberJonR356
Casual Dubber
*


Avatar


Posts: 24
Threads: 4
Registered: August 11th, 2010
Member Is Offline

Location: NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Optimistic

posted on July 13th, 2012 at 05:30 PM



Sold to Dibsy, thanks everyone


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2025 Aussieveedubbers

[ Queries: 40 ] [ PHP: 1.0% - SQL: 99.0% ]