| [ Total Views: 4482 | Total Replies: 30 | Thread Id: 98017 ] |
| Pages: 1 2 |
|
|
 SummerBus
Casual Dubber
Posts: 23
Threads: 5
Registered: August 16th, 2008
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 25th, 2012 at 05:37 PM |
|
|
Exhaust system options for 1600 SP (1970 Kombi)
Hello everybody im planning to lower my very stock Kombi.It's a 1970 model with a stock 1600 SP motor.What i'm looking for is a exhaust that will
tuck up nice and high and offer clearance and a decent exhaust note also.
I plan to keep the engine stock.
What are my options please?
|
|
|
silver
Veteran Volks Folk
Dangerous when poked
Posts: 2169
Threads: 162
Registered: December 8th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: In 2 Minds
|
| posted on July 25th, 2012 at 05:40 PM |
|
|
stock muffler?? the noise is for everyone else but you in reality
Keeping it real !
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on July 25th, 2012 at 05:55 PM |
|
|
For me it's an easy decision......
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
SummerBus
Casual Dubber
Posts: 23
Threads: 5
Registered: August 16th, 2008
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 25th, 2012 at 06:04 PM |
|
|
Aha looks good ,nice and high...is that a vintage speed set up?
|
|
|
tar76
Custom Title Time!
Posts: 1622
Threads: 95
Registered: December 18th, 2009
Member Is Offline
Location: Ningi Qld
Theme: UltimaBB Pro Blue
Mood: Rollin with The Dub Collective
|
| posted on July 25th, 2012 at 06:09 PM |
|
|
Sure is, and sounds so sweet on a upright motor 
"Obey your Dreams"!
62 Std beetle.
65 11 wnd Split "The Cross".
6? coming very soon!!!!
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on July 25th, 2012 at 06:28 PM |
|
|
Yep, Vintage Speed. That one is the header system that is available in 38, 42 and 48mm diameter primaries, there is a closer to stock style that uses
your old heater box's if need be. For your stock engine, fiut the heater box version or the 38mm header style, either is available with that tucked
outlet.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
silver
Veteran Volks Folk
Dangerous when poked
Posts: 2169
Threads: 162
Registered: December 8th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: In 2 Minds
|
| posted on July 25th, 2012 at 06:31 PM |
|
|
600 bucks for that it would want to last for a long while
Keeping it real !
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on July 25th, 2012 at 07:14 PM |
|
|
I do it cheaper...well a little  . They fit well, are excellent for ground
clearance, and to date, last very well, and I feel that by design, they should last indefinately. The stock VW or Porsche big can design is very
strong compared to long individual runners. Especially in s/s that has a large coefficient of expansion.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
RODZ
Seriously Crusin Dubber
aka- Rodney Tweed
Posts: 191
Threads: 14
Registered: December 13th, 2010
Member Is Offline
Location: Morayfield-Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Rollin with
|
| posted on July 25th, 2012 at 07:17 PM |
|
|
I have one of these on my lowlight tucked up nice....
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
"If it ain't rubbing,It ain't dubbing!!!!"
1966 Beetle
1969 Low Light Kombi
|
|
|
binner
Fahrvergnugen
Posts: 981
Threads: 210
Registered: January 19th, 2010
Member Is Offline
Location: Brisbane
Theme: UltimaBB Streamlined2
Mood: want more grunt
|
| posted on July 25th, 2012 at 07:51 PM |
|
|
VS thumbs up
shazzam, I like the one I bought. Been 7 months since fitting to a daily driver and the can has started to discolor and get spots of black (like a
leopard). The pipe is still nice and shiny, I do polish it about every 2 weeks though.
Sound is good, performance , well I have nothing to judge it by so I will say good for now,fit was good but I had to do a few changes to the rear
engine cradle to make it fit.
In all I'm happy after 7 months, about to swap it over to my DC build. I hope it lasts atleast 5 years 
out.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
SummerBus
Casual Dubber
Posts: 23
Threads: 5
Registered: August 16th, 2008
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 25th, 2012 at 08:54 PM |
|
|
Well my mind is made up,that system looks amazing and has everything i'm looking for....thanks guys .
|
|
|
silver
Veteran Volks Folk
Dangerous when poked
Posts: 2169
Threads: 162
Registered: December 8th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: In 2 Minds
|
| posted on July 25th, 2012 at 08:55 PM |
|
|
clearance for oil pumps??
Keeping it real !
|
|
|
waltermitty
Custom Title Time!
Legend when my beer goggles are on
Posts: 1993
Threads: 268
Registered: August 29th, 2002
Member Is Offline
Location: Port Macquarie now Yipee!
Theme: UltimaBB Pro Grey
Mood: Hungry for mor
|
| posted on July 25th, 2012 at 08:58 PM |
|
|
| Quote: | Originally
posted by SummerBus
Well my mind is made up,that system looks amazing and has everything i'm looking for....thanks guys .
|
Nice exhaust but a waste of $$ on a standard 1600 IMHO.
Look at how modified these guys engines are , hardly standard!
Mitchell
23 windows ...8 too many!
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on July 25th, 2012 at 09:06 PM |
|
|
The lower middle one on this page is for stock heater boxes
http://store.vintagespeed.com.tw/images/stories/pdf/P04.pdf
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
SummerBus
Casual Dubber
Posts: 23
Threads: 5
Registered: August 16th, 2008
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 26th, 2012 at 02:22 PM |
|
|
As good as this exhaust system looks...in reality its probably too much exhaust system for my ol' donk to pull off.
Thanks for the other link Mat,this option is probably a safer,more economical option....boring ha!
I'll wait and talk to Peter at Custom Veedub before i grab one.
Thanks again for the input gents.
|
|
|
Bigbertha
Casual Dubber
Posts: 34
Threads: 3
Registered: May 14th, 2012
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 27th, 2012 at 11:34 PM |
|
|
Mines a mostly stock 1600 sp. I just wanted a really good exhaust that would last, sound sweet and help keep the motor cool. So I went with a vintage
speed too.
|
|
|
SummerBus
Casual Dubber
Posts: 23
Threads: 5
Registered: August 16th, 2008
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 28th, 2012 at 07:12 AM |
|
|
Thanks for the input Bigbertha....so you're happy with the result?
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on July 28th, 2012 at 07:45 AM |
|
|
The Vintage Speed muffler is absolutely fine on a stocker, as long as you buy the correct model, they are designed for stock application.
The one person/idiot that says they are too big needs to get his facts right BEFORE posting. (sorry Waltermitty, can't hide behind that avatar and
get away with baseless comments)
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
Bigbertha
Casual Dubber
Posts: 34
Threads: 3
Registered: May 14th, 2012
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 28th, 2012 at 10:33 AM |
|
|
| Quote: | Originally
posted by SummerBus
Thanks for the input Bigbertha....so you're happy with the result?
|
Wish I could tell you . I'm happy with the look, but the motor isn't back in yet. I'm itching to start it up and hear it purr. I don't know of
anyone who hasn't been happy with vintage speed.
|
|
|
tar76
Custom Title Time!
Posts: 1622
Threads: 95
Registered: December 18th, 2009
Member Is Offline
Location: Ningi Qld
Theme: UltimaBB Pro Blue
Mood: Rollin with The Dub Collective
|
| posted on July 28th, 2012 at 10:45 AM |
|
|
RodZ bus is stock and i don't think he has any worries. I have a standard 1800 fitted with a VS on my bus and my bus runs good no dramas
"Obey your Dreams"!
62 Std beetle.
65 11 wnd Split "The Cross".
6? coming very soon!!!!
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on July 28th, 2012 at 11:30 AM |
|
|
| Quote: | Originally
posted by tar76
RodZ bus is stock and i don't think he has any worries. I have a standard 1800 fitted with a VS on my bus and my bus runs good no dramas
|
And your 1600 in the beetle is stock heads with Kadrons, so if the exhaust was too big it would make the Kaddies run poorly
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
waltermitty
Custom Title Time!
Legend when my beer goggles are on
Posts: 1993
Threads: 268
Registered: August 29th, 2002
Member Is Offline
Location: Port Macquarie now Yipee!
Theme: UltimaBB Pro Grey
Mood: Hungry for mor
|
| posted on July 28th, 2012 at 12:19 PM |
|
|
| Quote: | Originally
posted by matberry
The Vintage Speed muffler is absolutely fine on a stocker, as long as you buy the correct model, they are designed for stock application.
The one person/idiot that says they are too big needs to get his facts right BEFORE posting. (sorry Waltermitty, can't hide behind that avatar and
get away with baseless comments)
|
So I'M an idiot who is hiding and making baseless comments ?
Well you might be well qualified to make that judgement!
However you should first READ the original post SummerBus asked about an exhaust for a stock SP 1600 engine.
Also RE READ my posts, I always use my name I am hiding behind nothing and I have nothing to hide from and I am however not interested in self
promotion.
My comments were inresponce to yours, as you apparently failed to READ the original post, you posted an engine that appears far from stock.
The exhaust on it , would not be suitable for his stock 1500 sp in fact that exhaust wouldnt even fit ! it looks like a Type 4 exhaust to me.
Also READ my post again, I didn't say anything about that exhaust being "too big" as you claim I did? So who is the one making baseless comments
and not checking the facts?.
You were more helpful in your later posting pointing out that VS are available in different specification and yes the correct VS would be fine on his
engine, so would a stock exhaust as i first stated and it wouldnt cost $600.
I suggest you read everything before you shoot your mouth of and get YOUR facts right!
Or are you just hoping to sell a $5-$600 exhaust?
Walter Mitchell Montgomery
Mitchell
23 windows ...8 too many!
|
|
|
57oval
Officially Full-On Dubber
Posts: 305
Threads: 24
Registered: October 20th, 2006
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 28th, 2012 at 02:57 PM |
|
|
http://store.vintagespeed.com.tw/index.php?page=shop.product_details&flyp...
$415au + $94au shipping, $509 
|
|
|
binner
Fahrvergnugen
Posts: 981
Threads: 210
Registered: January 19th, 2010
Member Is Offline
Location: Brisbane
Theme: UltimaBB Streamlined2
Mood: want more grunt
|
| posted on July 28th, 2012 at 07:20 PM |
|
|
BRAAAAAP......BRAAAAAP... goes and gets popcorn and a comfy chair. 
|
|
|
SummerBus
Casual Dubber
Posts: 23
Threads: 5
Registered: August 16th, 2008
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 29th, 2012 at 01:23 PM |
|
|
Just havin a bit of fun with some oldschool photoshop using a scapel and stickytape..a bit crude but you get the idea.I'm thinkin 5 or 6 inches all
around but we'll see.
|
|
|
RODZ
Seriously Crusin Dubber
aka- Rodney Tweed
Posts: 191
Threads: 14
Registered: December 13th, 2010
Member Is Offline
Location: Morayfield-Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Rollin with
|
| posted on July 29th, 2012 at 07:09 PM |
|
|
Awesome pic/crop/photoshop but that's more than 5 - 6 inches, to get this low your going to have to chassis notch and seat pan tub.
I wanted to go this low but took mine down as low as could without major mods..... it may come in the future thou.
"If it ain't rubbing,It ain't dubbing!!!!"
1966 Beetle
1969 Low Light Kombi
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on July 29th, 2012 at 07:39 PM |
|
|
| Quote: | Originally
posted by waltermitty
| Quote: | Originally
posted by matberry
The Vintage Speed muffler is absolutely fine on a stocker, as long as you buy the correct model, they are designed for stock application.
The one person/idiot that says they are too big needs to get his facts right BEFORE posting. (sorry Waltermitty, can't hide behind that avatar and
get away with baseless comments)
|
So I'M an idiot who is hiding and making baseless comments ?
Well you might be well qualified to make that judgement!
However you should first READ the original post SummerBus asked about an exhaust for a stock SP 1600 engine.
Also RE READ my posts, I always use my name I am hiding behind nothing and I have nothing to hide from and I am however not interested in self
promotion.
My comments were inresponce to yours, as you apparently failed to READ the original post, you posted an engine that appears far from stock.
The exhaust on it , would not be suitable for his stock 1500 sp in fact that exhaust wouldnt even fit ! it looks like a Type 4 exhaust to me.
Also READ my post again, I didn't say anything about that exhaust being "too big" as you claim I did? So who is the one making baseless comments
and not checking the facts?.
You were more helpful in your later posting pointing out that VS are available in different specification and yes the correct VS would be fine on his
engine, so would a stock exhaust as i first stated and it wouldnt cost $600.
I suggest you read everything before you shoot your mouth of and get YOUR facts right!
Or are you just hoping to sell a $5-$600 exhaust?
Walter Mitchell Montgomery
Mitchell
|
Walter ...chill. You did state that it was too big in your opinion. I had already said that there are 4 different sizes of systems both when I posted
the pic of the dual carb 1776 in the bus and then again in my second post. I had also already took into acount his small engine and I had all my facts
right as opposed to you. I really don't need to defend myself or my post as it's all correct. Maybe the idiot reference was harsh, so I appologise
it that offended you, but if you had actually had a problem with a VS system that was properly sized to your engine you wouldn't have posted because
they work extremely well, 'when sized correctly to your specific requirement'.
The 'hide behind your avatar' comment was purely tongue in cheek badly timed joke. Your avatar has been the subject of many a discussion. Most
can't even read your posts due to not being able to concentrate as your avatar draws your eyes like a demon ..... a very nice one at that.
Sorry everyone else for the delay in posting....that popcorn hopefully didn't get too soggy. Been down in the shed all weekend. 
Back to normal programming...
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
waltermitty
Custom Title Time!
Legend when my beer goggles are on
Posts: 1993
Threads: 268
Registered: August 29th, 2002
Member Is Offline
Location: Port Macquarie now Yipee!
Theme: UltimaBB Pro Grey
Mood: Hungry for mor
|
| posted on July 30th, 2012 at 08:28 AM |
|
|
| Quote: |
Nice exhaust but a waste of $$ on a standard 1600 IMHO.
Look at how modified these guys engines are , hardly standard!
Mitchell
|
Mat,
Thanks for your qualified apology.
Nice you have admitted you were wrong.
However it seems you still haven't read my post ( see above). Where do I state that the VS is too big for a 1500 sp?
Perhaps you could follow your own advice and check your facts before your post.
Until then you are the pot calling the kettle.
Enough on the subject from me. Have the last say if you must but Ive signed off.
Mitchell
23 windows ...8 too many!
|
|
|
h
A.k.a.: Towely BuMpEr KING! ILLegal ALIEN on a roadtrip
Scirocco Rare
fractals - an ever changing lifestyle
Posts: 7670
Threads: 375
Registered: February 3rd, 2005
Member Is Offline
Location: noosa hillbilly 'yee har'
Theme: XMBX Pro Green
Mood: A T3 is not a Kombi - stop waving at me
|
| posted on July 30th, 2012 at 08:39 AM |
|
|
soo.. what did you end up looking at getting after that long winded made a wrong turn at Albuquerque blah blah..?
made a decision yet
those shiny VS do look sexy though
|
|
|
Klaus
Custom Title Time!
Posts: 1439
Threads: 100
Registered: August 25th, 2004
Member Is Offline
Location: Wollongong
Theme: UltimaBB Pro Blue ( Default )
Mood: Heavily modified
|
| posted on July 30th, 2012 at 02:12 PM |
|
|
not to mention gearbox scraping and rear engine hanger and drag link oh and beam side plates ...been there scraped it all
|
|
|
| Pages: 1 2 |
