| [ Total Views: 928 | Total Replies: 5 | Thread Id: 98276 ] |
|
|
 ashbaxter
Officially Full-On Dubber
Posts: 224
Threads: 78
Registered: January 24th, 2011
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 10th, 2012 at 03:06 PM |
|
|
4.12 vs 3.88 transmission
I have been looking at these freewayflyer tranmissions on the net in order to get a better top speed out of the Ghia without revving the guts out of
it.
I have a twin port 1600 and would like to be able to cruise comforably at 60-65mph when need but am concerned that I may loose too much off the start
if I pick the wrong one.
Any opinions or experiences please?
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on August 10th, 2012 at 03:48 PM |
|
|
Hi
The stock 4th gear speeds in both boxes workout about the same at about 31 KPH per thousand with a 24 inch tyre.
What ratio do the freeway flyers use?
Steve
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on August 10th, 2012 at 06:03 PM |
|
|
It depends which gearboxes you are looking at, as some places just call Lbug boxes freeway fliers as a marketing wank and as Steve says the difference
between the Lbug 3.88 box and the 1500/Sbug box at 100km/h is only 50rpm.
You don;t want to slow the revs too much as it will only cause overheating and crap fuel mileage.
Some "freeway fliers" put a taller 4th which is fine with a big HP motor but will load up a stocker too much.
A 1600 twin port in a ghia with a 4.125 or 3.88 stock box will cruise all day at 80mph, have you got a 1200 or 1300 box in there at the moment?
|
|
|
ashbaxter
Officially Full-On Dubber
Posts: 224
Threads: 78
Registered: January 24th, 2011
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 12th, 2012 at 08:16 PM |
|
|
Mate I'm not sure what it is I need to get under and find the number to work out what it is.
|
|
|
grumble
Son of Jim - Creator of Good
Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
| posted on August 12th, 2012 at 09:07 PM |
|
|
Ash my Ghia with a std 1200 box and 1600 single port revs at about 3000rpm at 60mph (100kph) and runs happily at that,on the expressway we ran it up
to 65mph most of the way to Newcastle with no problems,as Joel says you don't want to slow the revs too much.
|
|
|
Klaus
Custom Title Time!
Posts: 1439
Threads: 100
Registered: August 25th, 2004
Member Is Offline
Location: Wollongong
Theme: UltimaBB Pro Blue ( Default )
Mood: Heavily modified
|
| posted on August 12th, 2012 at 11:43 PM |
|
|
ghias have a different ratio box dont they "ao" code
|
|
|
