| [ Total Views: 1189 | Total Replies: 25 | Thread Id: 98651 ] |
|
|
 bug68m
Commited Dubber
Posts: 55
Threads: 15
Registered: May 20th, 2012
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 2nd, 2012 at 08:01 PM |
|
|
retractable front seat belts
hi any one know what the retractable front seat belts are like from just kampers eg are they simple to fit i have a 68 beetle
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on September 2nd, 2012 at 11:24 PM |
|
|
Dunno on those but do an online search. I found Klippan and bought for my 59 Beetle from them. They retail thru Supercheap. Was about $ 90 per side.
madness is in the eye of the beholder  |
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on September 3rd, 2012 at 07:22 AM |
|
|
They would have to be ADR approved to be sold in Australia so there is a good chance they will be alright, you will need the bracket to fit the reel
to the lower mount and they should have that also.
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on September 3rd, 2012 at 09:34 PM |
|
|
ADR should give an ISO certification standard that all OEM and aftermarket worldwide companies must comply with to produce a road legal seatbelt for
all countries.
That's if you wish to buy from OS but as they don't cost much to buy locally then why bother but just so you can make sure that if JustKampers are
being supplied from Europe then you can check they meet the ISO standard for use in Australia.
madness is in the eye of the beholder |
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on September 3rd, 2012 at 09:41 PM |
|
|
I am quite certain that it is illeagal to sell seat belts without the approvals unless it states that it is not to be used on the road so you can be
certain that the belts from just campers would comply.
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on September 3rd, 2012 at 11:48 PM |
|
|
| Quote: | Originally
posted by vwo60
I am quite certain that it is illeagal to sell seat belts without the approvals unless it states that it is not to be used on the road so you can be
certain that the belts from just campers would comply.
|
Nice if that reg actually exists  I mean Volksconversions sells gear that
don't comply with ADR's 
madness is in the eye of the beholder |
|
|
VioletBlue
Learner Dubber
Posts: 8
Threads: 1
Registered: February 10th, 2012
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 6th, 2012 at 05:56 AM |
|
|
| Quote: | Originally
posted by psimitar
| Quote: | Originally
posted by vwo60
I am quite certain that it is illeagal to sell seat belts without the approvals unless it states that it is not to be used on the road so you can be
certain that the belts from just campers would comply.
|
Nice if that reg actually exists I mean Volksconversions sells gear that
don't comply with ADR's
|
I'm getting around to buying rear seatbelts, and noticed one Australian VW parts site with a disclaimer on some belts, along the lines of "Note
that this is not certified as meeting Australian Standards"
'65 Beetle 1989-2000 (RIP), '66 Beetle 2001-
|
|
|
68BUS
Wolfsburg Wizard
Posts: 485
Threads: 19
Registered: July 1st, 2011
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue
Mood: Berwildered
|
| posted on September 6th, 2012 at 08:19 AM |
|
|
There has been talk in the past about Wolfsburb West belts not complying with ADRS which would be a shame as they are one of the nices looking
belts.
If they are new belts they really should be installed and engineer certified.
Roy at the Busstop has ADR Approved ones.
As would Jamie at Kustom Kombi.
Both Gold Coast but could post if your not close.
1966 Aussie 11 Window
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on September 6th, 2012 at 06:01 PM |
|
|
| Quote: | Originally
posted by 68BUS
There has been talk in the past about Wolfsburb West belts not complying with ADRS which would be a shame as they are one of the nices looking
belts.
If they are new belts they really should be installed and engineer certified.
Roy at the Busstop has ADR Approved ones.
As would Jamie at Kustom Kombi.
Both Gold Coast but could post if your not close.
|
If you mean the lap sash belts then they should be fine but as I said should still meet an ISO for international use.
Unfortunately, companies get away with this crap due to our governments being crap and hence leaving the nitty gritty legal compliance down to the
owner of the vehicle. Germany is one of the few countries that states that aftermarket parts must be TUV approved for resale. Pretty sure RED9 in the
UK has UK engineering approval too.
madness is in the eye of the beholder |
|
|
hulbyw
Insano Dub Head
Posts: 804
Threads: 131
Registered: September 28th, 2009
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm OK, RU?
|
| posted on September 6th, 2012 at 08:50 PM |
|
|
Correct but dropped spindles from Hoffman Speedster in Germany are not TUV approved. So you still have to be careful when buying aftermarket
Hemco industries are based in Ballarat in Vic. They sell ADR approved belts to fit almost anything and also do colours. I had them do a special order
a few years ago for my son's Datsun 1600. Great job and all legal. No experience with the Just Kampers ones though.
To fit retractable belts in a '68, you may need the mounting bracket that turns the reel through 90 degees, so the reel axis is actually across the
car. The brackets are from a later model Beetle but I can't remember which year. Maybe Hemco can supply something similar. Won't hurt to ask
Cheers.......Wayne
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on September 6th, 2012 at 09:24 PM |
|
|
Just campers have all the hard ware to do the conversion.
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on September 6th, 2012 at 11:39 PM |
|
|
| Quote: | Originally
posted by hulbyw
Correct but dropped spindles from Hoffman Speedster in Germany are not TUV approved. So you still have to be careful when buying aftermarket
Hemco industries are based in Ballarat in Vic. They sell ADR approved belts to fit almost anything and also do colours. I had them do a special order
a few years ago for my son's Datsun 1600. Great job and all legal. No experience with the Just Kampers ones though.
To fit retractable belts in a '68, you may need the mounting bracket that turns the reel through 90 degees, so the reel axis is actually across the
car. The brackets are from a later model Beetle but I can't remember which year. Maybe Hemco can supply something similar. Won't hurt to ask
Cheers.......Wayne
|
And unfortuntely, even tho TUV is more stringent than ADR, if you buy TUV approved stuff there is still no guarantee that an Oz vehicle engineer will
approve the modification if he thinks the aftermarket item doesn't meet ADR.
Hemco and Klippan are both ADR compliant and Klippan do various colours too
madness is in the eye of the beholder |
|
|
cam070
Custom Title Time!
Posts: 1332
Threads: 53
Registered: July 25th, 2009
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Getting hands dirty stripping the bug down
|
| posted on September 6th, 2012 at 11:58 PM |
|
|
It wouldn't be the first time ADRs lagged behind the rest fo the world and won't approve things that pass standards such as TUV, which even exceed
ADRs.
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on September 8th, 2012 at 10:15 PM |
|
|
| Quote: | Originally
posted by cam070
It wouldn't be the first time ADRs lagged behind the rest fo the world and won't approve things that pass standards such as TUV, which even exceed
ADRs.
|
Yea, ADR's are somewhat more of a boiler maker approach and do need to get with the modern times instead of trying to be the big I am and doing
things it's own way.
Hopefully it'll get there sometime soon
madness is in the eye of the beholder |
|
|
AA003
A.k.a.: Phill
Custom Title Time!
Posts: 1189
Threads: 39
Registered: October 27th, 2011
Member Is Offline
Location: Southern Highlands
Theme: UltimaBB Streamlined2
|
| posted on September 9th, 2012 at 07:20 AM |
|
|
All belts need to be ADR approved.
Euro and US belts may not be approved. VW has different belts in Australian vehicles. They are a lot of belts sold in Australia that are not
approved.
Get the Hemco as it is approved and what is supplied by Volkswagen.
I read it on samba, so it must be correct.
Sometimes Volkswagen dealers sell spare parts. Amazing isn't it!
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on September 9th, 2012 at 01:07 PM |
|
|
| Quote: | Originally
posted by AA003
All belts need to be ADR approved.
Euro and US belts may not be approved. VW has different belts in Australian vehicles. They are a lot of belts sold in Australia that are not
approved.
Get the Hemco as it is approved and what is supplied by Volkswagen.
|
I doubt any OEM vehicle manufacturer these days installs specific Oz anything. Vehicles are homologated so that they comply with all country vehicle
standards b4 leaving the factory, wherever in the world that may be.
madness is in the eye of the beholder |
|
|
AA003
A.k.a.: Phill
Custom Title Time!
Posts: 1189
Threads: 39
Registered: October 27th, 2011
Member Is Offline
Location: Southern Highlands
Theme: UltimaBB Streamlined2
|
| posted on September 10th, 2012 at 07:13 AM |
|
|
| Quote: | Originally
posted by psimitar
I doubt any OEM vehicle manufacturer these days installs specific Oz anything. Vehicles are homologated so that they comply with all country vehicle
standards b4 leaving the factory, wherever in the world that may be.
|
Mate, you really have no idea what you are talking about. One of the VW "M" options is "made for Australia."
What about child restraints? Ours are Australia only.
What about the owner's handbook "Australian Supplement"?
My Audi was recalled because the sticker on the jack did not meet Australian standards.
The Golf 2 GTI had a CRAB bar for Australia only.
Our tyres have different standards.
A Chery does not comply with Victorian standards but does in NSW.
Our air bags would not be legal in the US.
I read it on samba, so it must be correct.
Sometimes Volkswagen dealers sell spare parts. Amazing isn't it!
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on September 10th, 2012 at 09:38 AM |
|
|
| Quote: | Originally
posted by AA003
All belts need to be ADR approved.
Euro and US belts may not be approved. VW has different belts in Australian vehicles. They are a lot of belts sold in Australia that are not
approved.
Get the Hemco as it is approved and what is supplied by Volkswagen.
|
Speaking of which, where can one find the original aussie seat belts?
Guessing only 2nd and then a licensed belt re-webbing/reconditioning?
Someone put in butt ugly "sticks out like dogs balls" retractable belts in mine 
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
wild baja
Casual Dubber
Posts: 26
Threads: 3
Registered: September 19th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 10th, 2012 at 11:48 AM |
|
|
Ive just been thru this with my engineer for certification of my 69 baja .
what he says is, while the retractable seats belts may be approved, the OEM B pillar of my model is not designed for the double pull of a retractable
belt, thus he cannot approve the conversion. However if I put a roll bar in with new 7/16 UNF point he can appprove that for retractable belts.
|
|
|
AA003
A.k.a.: Phill
Custom Title Time!
Posts: 1189
Threads: 39
Registered: October 27th, 2011
Member Is Offline
Location: Southern Highlands
Theme: UltimaBB Streamlined2
|
| posted on September 10th, 2012 at 12:08 PM |
|
|
| Quote: | Originally
posted by vlad01
| Quote: | Originally
posted by AA003
All belts need to be ADR approved.
Euro and US belts may not be approved. VW has different belts in Australian vehicles. They are a lot of belts sold in Australia that are not
approved.
Get the Hemco as it is approved and what is supplied by Volkswagen.
|
Speaking of which, where can one find the original aussie seat belts?
Guessing only 2nd and then a licensed belt re-webbing/reconditioning?
Someone put in butt ugly "sticks out like dogs balls" retractable belts in mine
|
Hemco. Made in Australia supplied to Volkswagen for Australian cars and sold by Vintage Vee Dub Supplies.
I read it on samba, so it must be correct.
Sometimes Volkswagen dealers sell spare parts. Amazing isn't it!
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on September 10th, 2012 at 12:33 PM |
|
|
| Quote: | Originally
posted by AA003
| Quote: | Originally
posted by psimitar
I doubt any OEM vehicle manufacturer these days installs specific Oz anything. Vehicles are homologated so that they comply with all country vehicle
standards b4 leaving the factory, wherever in the world that may be.
|
Mate, you really have no idea what you are talking about. One of the VW "M" options is "made for Australia."
What about child restraints? Ours are Australia only.
What about the owner's handbook "Australian Supplement"?
My Audi was recalled because the sticker on the jack did not meet Australian standards.
The Golf 2 GTI had a CRAB bar for Australia only.
Our tyres have different standards.
A Chery does not comply with Victorian standards but does in NSW.
Our air bags would not be legal in the US.
|
Yes I truely don't know what I'm on about.
The majority of a vehicle IS HOMOLAGATED to meet worldwide standards. Supplementary items such as a child seat is not part of homolagation regulations
and hence comes under country specific 'supplements'
Personally, I'm rather sick and tired of ADR's boiler maker approach to vehicle standards but that's just me :P
madness is in the eye of the beholder |
|
|
AA003
A.k.a.: Phill
Custom Title Time!
Posts: 1189
Threads: 39
Registered: October 27th, 2011
Member Is Offline
Location: Southern Highlands
Theme: UltimaBB Streamlined2
|
| posted on September 10th, 2012 at 12:53 PM |
|
|
| Quote: | Originally
posted by psimitar
The majority of a vehicle IS HOMOLAGATED to meet worldwide standards.
|
The good thing about worldwide standards is that there is so many of them.
I read it on samba, so it must be correct.
Sometimes Volkswagen dealers sell spare parts. Amazing isn't it!
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on September 10th, 2012 at 01:21 PM |
|
|
| Quote: | Originally
posted by wild baja the OEM B pillar of my model is not designed for the double pull of a retractable belt, thus he cannot approve the conversion
|
Hi
Your engineer would know more than me but the stock belt is a 3 point belt as is a retractable belt using the same mounting points, I can't
understand what he's getting at.
Steve
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on September 10th, 2012 at 03:10 PM |
|
|
| Quote: | Originally
posted by AA003
| Quote: | Originally
posted by vlad01
| Quote: | Originally
posted by AA003
All belts need to be ADR approved.
Euro and US belts may not be approved. VW has different belts in Australian vehicles. They are a lot of belts sold in Australia that are not
approved.
Get the Hemco as it is approved and what is supplied by Volkswagen.
|
Speaking of which, where can one find the original aussie seat belts?
Guessing only 2nd and then a licensed belt re-webbing/reconditioning?
Someone put in butt ugly "sticks out like dogs balls" retractable belts in mine
|
Hemco. Made in Australia supplied to Volkswagen for Australian cars and sold by Vintage Vee Dub Supplies.
|
I wonder if they can recondition my existing ones? I quite like the og big buckle dodge truck style belts.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on September 10th, 2012 at 04:45 PM |
|
|
| Quote: | Originally
posted by 1303Steve
| Quote: | Originally
posted by wild baja the OEM B pillar of my model is not designed for the double pull of a retractable belt, thus he cannot approve the conversion
|
Hi
Your engineer would know more than me but the stock belt is a 3 point belt as is a retractable belt using the same mounting points, I can't
understand what he's getting at.
Steve
|
YOu're quite right in saying that if the vehicle has original OEM 3 point mounting captives fitted that an ADR compliant aftermarket 3 point will fit
straight in and not even require and engineer.
If however your vehicle does not have original OEM 3 point mounting holes then you must follow the ADR and NCOP to fit the appropriate load spreaders
where each mounting point is required. This I know as I had to do this to get a blue plate for my 59 Beetle with 3 points certified
madness is in the eye of the beholder |
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on September 10th, 2012 at 04:46 PM |
|
|
| Quote: | Originally
posted by AA003
| Quote: | Originally
posted by psimitar
The majority of a vehicle IS HOMOLAGATED to meet worldwide standards.
|
The good thing about worldwide standards is that there is so many of them.
|
I thought that's what the International Standards Organisation (ISO) were there for? Like ISO9001 used throughout Oz for many construction and
fabrication projects.
madness is in the eye of the beholder |
|
|
