| [ Total Views: 1272 | Total Replies: 9 | Thread Id: 98793 ] |
|
|
 bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
|
 posted on September 13th, 2012 at 08:08 PM |
|
|
Engine case cleaning, what solvents do you use?
G'day guys,
having fun getting greasy today. I read in Mr. Tom Wilson's 'how to rebuild your volkwagen aircooled engine' that magnesium is sensative to certain
caustic chemicals etc and care should be taken as to what is used to cleaning the case.
It keeps refering to use a solvent, but would anyone know exactly what this solvent might be? lol. I had one go at getting most of the grease off with
dishwashing liquid and elbow grease but its got a long way to go. I wasn't sure if automotive degreaser might be too harsh.
Was thinking about taking it to the car wash at night and using the pressure cleaner, but not sure if i would be game to use their degreaser or
cleaning chemicals.
What do you guys rekon?
Thanks in advance!
Christopher.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta! |
|
|
shokwave2
A.k.a.: Matt Hamilton
Officially Full-On Dubber
Posts: 289
Threads: 28
Registered: March 7th, 2010
Member Is Offline
Theme: UltimaBB Psyche Blue
|
| posted on September 13th, 2012 at 08:23 PM |
|
|
I recently built a 2054cc motor using my old 1600 case and i just used cheap cans of degreaser. Buy about 5+ cans, spray and let it sit overnight then
hose down or take to local car wash. If you're going for show car finish then you'll need that extra elbow grease.
|
|
|
silver
Veteran Volks Folk
Dangerous when poked
Posts: 2169
Threads: 162
Registered: December 8th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: In 2 Minds
|
| posted on September 13th, 2012 at 08:25 PM |
|
|
If you just want it clean, dissolve Omo in really hot water and use that with a brush
it cleans everything I clean my resin brushes with this and the come out new
Keeping it real !
|
|
|
grumble
Son of Jim - Creator of Good
Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
| posted on September 13th, 2012 at 08:30 PM |
|
|
Castrol parts cleaner works really well,purchase from Repco or Bursons,save and reuse.
|
|
|
nils
Fahrvergnugen
Posts: 971
Threads: 65
Registered: January 11th, 2008
Member Is Offline
Location: central coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 13th, 2012 at 08:44 PM |
|
|
I use oven cleaner 
Quit calling rust patina
|
|
|
vertex
Slammed & Awesome Dubber
Posts: 90
Threads: 21
Registered: July 9th, 2010
Member Is Offline
Location: Central Queensland
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 13th, 2012 at 09:08 PM |
|
|
just did a case I am working on. just used the cheap degreaser. went through alot of tins. then dishwashing liquid and the high pressure hose. came up
ok. still need to scrub some areas but mostly clean.
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on September 13th, 2012 at 09:56 PM |
|
|
Selleys BBQ Cleaner is a good degreaser
I haven't tried it on an engine though..
but I do use the cheap FOAMING degreaser spray cans
it foams up and does its work in about a minute or so...
You can use a coarse brush to help get any thing that is thick off
then just hose it off... use it on all My car
I even use it on My painted tinware etc...
but wouldn't leave it on for long...lol
Lee
most cleaners these days aren't as bad as a few years ago..
I used some in a plastic sink and it got hot and started to eat into the sink... Yikes..
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
|
| posted on September 13th, 2012 at 10:15 PM |
|
|
Haha, seems like quite a few options  .
We got a kick ass laundry powder and it will be the volksie a nice scent too lol. I'll take a trip to the auto store and pickup a carton of parts
cleaner. I thought it would be worth asking, the book was saying also that carburettor cleaner on magnesium was a big no no, as well as hot baths etc.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears.
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta! |
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on September 14th, 2012 at 12:50 PM |
|
|
| Quote: | Originally
posted by silver
If you just want it clean, dissolve Omo in really hot water and use that with a brush
it cleans everything I clean my resin brushes with this and the come out new
|
+1 I use washing powder mixed up as a concentrated slurry and that's really good for cleaning alloys of sorts, but don't soke it too long as its
caustic and eventually dissolves aluminum and similar soft white metals eg Mg
So I would not leave a case over night in it otherwise, bye bye tolerances.
Phosphoric acid is the best to use after to make the alloy bright and clean and also etches it ready for engine/caliper enamels. ( not recommended to
use on an mag open case)
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on September 17th, 2012 at 12:59 AM |
|
|
I used the works gurney station to clean my case. Was plumbed with degreaser and came up pretty good but I still had to use a neat degreaser after
that to soak for an hour to get the oily residue off.
I used Koala care from Supercheap. It's nowhere near as harsh as proper chemical degreasers but a few applications did the trick.
Also, try Kerosene and then a degreaser after that to remove the kero oily residue
madness is in the eye of the beholder  |
|
|
