| [ Total Views: 640 | Total Replies: 6 | Thread Id: 98905 ] |
|
|
 psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on September 22nd, 2012 at 12:34 PM |
|
|
Is this door repair patch strong enough?
So having to repair my nice solid 59 doors due to a previous owner letting the passenger door swing back so far that bent the hinges, the A-pillar,
the door and partially rip the rivets thro the outer door skin.
So here's the rivet area I've cut out due to the rivets pulling thru.
So the question is, to maximise strength in the repair should I extend the repair patch up the door pillar or due to the inner strengthener it'll be
strong enough?
madness is in the eye of the beholder  |
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on September 22nd, 2012 at 11:00 PM |
|
|
anyone?
madness is in the eye of the beholder |
|
|
 helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on September 23rd, 2012 at 10:01 AM |
|
|
It should be as strong as the original, if you repair it to the original method.
So if it swings too far again, it will rip the rivets again.
If you create more bracing, it will allow other areas to bend or rip before the rivet area does.
So yes it will be strong enough as originally designed.
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on September 23rd, 2012 at 12:05 PM |
|
|
^^ x2, and the inner takes/spreads the load, but it's hard to tell much more from your pic, ie. the condition of the panels left.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on September 23rd, 2012 at 01:54 PM |
|
|
| Quote: | Originally
posted by matberry
^^ x2, and the inner takes/spreads the load, but it's hard to tell much more from your pic, ie. the condition of the panels left.
|
Panels are in A1 condition. Just a bit of surface rust on the inner strengthener that has been Rustkill painted.
Can go ahead and weld a repair piece in now 
Cheers 
madness is in the eye of the beholder |
|
|
vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on September 23rd, 2012 at 07:29 PM |
|
|
make sure u fit the origional check strap
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on September 23rd, 2012 at 07:45 PM |
|
|
Sure will Need to find some cotter pins as PO was using cut down nails
 No surprise on the damage to the door when you find things like that.
madness is in the eye of the beholder |
|
|
