| [ Total Views: 4713 | Total Replies: 67 | Thread Id: 47197 ] |
| Pages: 1 2 3 |
|
|
 ruckus
Veteran Volks Folk
Posts: 2118
Threads: 165
Registered: June 19th, 2004
Member Is Offline
Location: Osaka, Japan
Theme: UltimaBB Pro Blue ( Default )
Mood: Pretty strong for a chalk-pusher
|
| posted on December 22nd, 2005 at 09:48 AM |
|
|
Frederik the oval
Ok so it's time for me to start talking about Frederik the '54. I pulled it apart last weekend so I could get a better look behind the fenders etc
and was very happy to find only a few problem areas.
1/ Front left firewall/heater channel ext. has had a dodgy repair job and needs to be re-done.
2/ Rear bumper mounts both look pretty sketchy and need to be re-done.
3/ Rear left Jacking point seems to suggest that the left firewall might be a bit of a pain in the arse.
4/ Bottom of decklid again has had a dodgy repair done to it and probably needs to be re-done.
5/ Bottom left corner of windscreen and the leading edge lip under the bonnet both need attention (Don't know how to do this one as no one seems to
make repair sections).
I'll have some pics of the problem areas in the next week or so after I go down to G-town. If anyone's got any comments/suggestions please feel free
to go nuts 
Oh, and sorry for exposing you all to Chris' hairy navel again.
Yay for school Holidays!!!!
Yeah I know Doc, Rhino comes first.
[ Edited on 23-12-05 by ruckus ]
 |
|
|
PrettyBlueBug
A.k.a.: P.B.B....
Veteran Volks Folk
Almost over it...
Posts: 2032
Threads: 70
Registered: May 8th, 2005
Member Is Offline
Location: Melbourne, Australia.
Theme: UltimaBB Pro Purple
Mood: 
|
| posted on December 22nd, 2005 at 10:48 AM |
|
|
What are your plans for Fred then....? :P
|
|
|
ruckus
Veteran Volks Folk
Posts: 2118
Threads: 165
Registered: June 19th, 2004
Member Is Offline
Location: Osaka, Japan
Theme: UltimaBB Pro Blue ( Default )
Mood: Pretty strong for a chalk-pusher
|
| posted on December 22nd, 2005 at 11:11 AM |
|
|
Late swing pan (the one currently under Elmo), narrowed adjustable bj beam (sitting next to Freddy at the moment), dropped spindles maybe, NB 17"
Brms or 17" Radars...
Then sell the bastard
[ Edited on 23-12-05 by ruckus ]
|
|
|
ren
A.k.a.: PARKER LEWIS!
Wolfsburg Wizard
Posts: 629
Threads: 58
Registered: March 8th, 2005
Member Is Offline
Location: elwood, me-ru-bo-nu
Theme: UltimaBB Pro Blue ( Default )
Mood: Milky Fresh!
|
| posted on December 22nd, 2005 at 04:19 PM |
|
|
At least the paint is already sorted..... |
|
|
ruckus
Veteran Volks Folk
Posts: 2118
Threads: 165
Registered: June 19th, 2004
Member Is Offline
Location: Osaka, Japan
Theme: UltimaBB Pro Blue ( Default )
Mood: Pretty strong for a chalk-pusher
|
| posted on December 23rd, 2005 at 06:48 PM |
|
|
pics:
(details later)
1/ Front left firewall/heater channel ext. has had a dodgy repair job and needs to be re-done.
2/ Rear bumper mounts both look pretty sketchy and need to be re-done.
left:
right:
3/ Rear left Jacking point seems to suggest that the left firewall might be a bit of a pain in the arse.
4/ Bottom of decklid again has had a dodgy repair done to it and probably needs to be re-done.
5/ Bottom left corner of windscreen and the leading edge lip under the bonnet both need attention (Don't know how to do this one as no one seems to
make repair sections).
Annoying hole in the other side found today:
Few little holes at the base of rear window. I assume these can be welded up?
Couple of holes in the rear corners (internal) either side of the window:
Couple of tiny holes at the base of the curved bit (can't really see them):
[ Edited on 23-12-05 by ruckus ]
|
|
|
oval TOFU
Son of Jim - Creator of Good
Bitte, ein Bit!
Posts: 2946
Threads: 234
Registered: July 10th, 2003
Member Is Offline
Location: Pt Cookie, Melburg
Theme: UltimaBB Pro Grey
Mood: :booM
|
| posted on December 23rd, 2005 at 07:43 PM |
|
|
If you didn't have a hobby before, well, you do now!
17" radars? where do you get them?!
*cough* bling *cough*
...and Robert's ya father's brother...
|
|
|
dak002
A.k.a.: rossko
Seriously Crusin Dubber
Posts: 181
Threads: 15
Registered: April 20th, 2005
Member Is Offline
Location: melb, hawksburn.
Theme: UltimaBB Pro Grey
Mood: fine, I said FINE ! !
|
| posted on December 23rd, 2005 at 08:10 PM |
|
|
17" radars,
you get them,
and we'll try them out on mine, and see how they look.:tree
There's nothing like the wind on your head, where your hair used to be.....................
 |
|
|
ruckus
Veteran Volks Folk
Posts: 2118
Threads: 165
Registered: June 19th, 2004
Member Is Offline
Location: Osaka, Japan
Theme: UltimaBB Pro Blue ( Default )
Mood: Pretty strong for a chalk-pusher
|
| posted on December 24th, 2005 at 01:03 AM |
|
|
Sure Ross. You can pay for the custom brakes for them then...
hehehe
|
|
|
dak002
A.k.a.: rossko
Seriously Crusin Dubber
Posts: 181
Threads: 15
Registered: April 20th, 2005
Member Is Offline
Location: melb, hawksburn.
Theme: UltimaBB Pro Grey
Mood: fine, I said FINE ! !
|
| posted on December 24th, 2005 at 05:51 AM |
|
|
well I've got a the complete, ready to go, twin leading shoe, drum brake set up.
would that help,
There's nothing like the wind on your head, where your hair used to be.....................
|
|
|
 BUGBOY
Super Moderator
Chief Toy Dude / Head Cruiser
Posts: 2147
Threads: 403
Registered: August 27th, 2002
Member Is Offline
Location: Bass coast
Theme: UltimaBB Pro Blue ( Default )
Mood: A wise German once said
|
| posted on December 24th, 2005 at 07:37 AM |
|
|
Bottom of you windscreen
Best way to reapair this area is with a mig and a block of copper.
You place the copper under the bottom and weld from the top and biuld it all back up. Takes a bit of time, but gives a great result. Saves cutting out
a huge bit of metal and try to make something to fit.:thumb
Everything 36HP !
Change over king and link spindles
6-12volt semaphores
Find us on Facebook
|
|
|
ren
A.k.a.: PARKER LEWIS!
Wolfsburg Wizard
Posts: 629
Threads: 58
Registered: March 8th, 2005
Member Is Offline
Location: elwood, me-ru-bo-nu
Theme: UltimaBB Pro Blue ( Default )
Mood: Milky Fresh!
|
| posted on December 24th, 2005 at 08:05 AM |
|
|
there you go rob.... |
|
|
ruckus
Veteran Volks Folk
Posts: 2118
Threads: 165
Registered: June 19th, 2004
Member Is Offline
Location: Osaka, Japan
Theme: UltimaBB Pro Blue ( Default )
Mood: Pretty strong for a chalk-pusher
|
| posted on December 24th, 2005 at 09:07 AM |
|
|
Nathan you are an absolute legend!!
|
|
|
beerdoc
A.k.a.: Doc
Insano Dub Head
Posts: 838
Threads: 42
Registered: July 27th, 2004
Member Is Offline
Location: Geelong Vic
Theme: UltimaBB Pro Blue ( Default )
Mood: Its all good
|
 posted on December 24th, 2005 at 08:34 PM |
|
|
No xmas presents for you
You must have Freddy in a manger and JC is missing from his cradle
:beer:beer:beer:beer:beer
Cheers Doc
reVOLKS at Fyansford Geelong
20th OCT 2007 STAY TUNED FOR DETAILS
 |
|
|
beerdoc
A.k.a.: Doc
Insano Dub Head
Posts: 838
Threads: 42
Registered: July 27th, 2004
Member Is Offline
Location: Geelong Vic
Theme: UltimaBB Pro Blue ( Default )
Mood: Its all good
|
| posted on December 24th, 2005 at 08:35 PM |
|
|
OR
The three wise men came in a dub
How cool is that
:thumb
Cheers Doc
reVOLKS at Fyansford Geelong
20th OCT 2007 STAY TUNED FOR DETAILS
|
|
|
Mr Bubble Head
Insano Dub Head
Posts: 829
Threads: 107
Registered: August 29th, 2002
Member Is Offline
Location: Melborne,Australia
Theme: UltimaBB Powder
|
| posted on December 29th, 2005 at 10:28 AM |
|
|
good section
I've got a good section for the rear of the front hood ie in front of window screen I'll try and cut it out so you have all /most of the bottom
screen rust hole repair but at least you'll be able to repair the big rust hole in the bonett closing gap
U2U me
Cheers nIck
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
recycle, restore, enjoy
|
|
|
pete wood
A.k.a.: figure itout
23 Windows of Awesome
Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline
Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands
|
| posted on December 29th, 2005 at 02:34 PM |
|
|
My panel beater told me this great way of welding up pin holes. You get a thick flat piece of brass and hold it up agains the underside of the hole,
then you just MIG weld up the pin hole and grind it back. Works a treat coz the mig won't stick the brass and the brass soaks up some of the heat so
the weld can't blow out as easily.
|
|
|
Hertz
Custom Title Time!
www.melburgluft.com
Posts: 1080
Threads: 84
Registered: November 27th, 2005
Member Is Offline
Location: Croydon Nth.
Theme: UltimaBB Pro Blue ( Default )
Mood: Too lazy to give it a thought actually.
|
| posted on December 29th, 2005 at 07:58 PM |
|
|
Looks like a good one to keep your weekends busy for a while. If you need a panel beater for some of the more challenging bits, let me know, the head
panel beater from my work is an old vw nut from years back and is always doing cash jobs, and he is only up in donvale so it could be handy. Anyway
great find! |
|
|
Mr Bubble Head
Insano Dub Head
Posts: 829
Threads: 107
Registered: August 29th, 2002
Member Is Offline
Location: Melborne,Australia
Theme: UltimaBB Powder
|
| posted on December 29th, 2005 at 08:01 PM |
|
|
Here you go
Just cut this out hope it will help you
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
recycle, restore, enjoy
|
|
|
ruckus
Veteran Volks Folk
Posts: 2118
Threads: 165
Registered: June 19th, 2004
Member Is Offline
Location: Osaka, Japan
Theme: UltimaBB Pro Blue ( Default )
Mood: Pretty strong for a chalk-pusher
|
| posted on January 3rd, 2006 at 10:21 PM |
|
|
You've got a u2u... and I'm happy!
|
|
|
Turbo54
Veteran Volks Folk
Posts: 2220
Threads: 268
Registered: July 13th, 2004
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
Mood: Boost'n
|
| posted on January 4th, 2006 at 09:54 AM |
|
|
Looks like you are going to be busy.
Did it come with all correct tail lights, bonnet, steering wheel, headlights etc?
The deck lid looks like a wide spring, did it come with the spring? These are the bits to look out for and I will keep my eyes open if you list what
your mssing. I have almost completed my 2 54's (in parts not resto) and will keep my eyes open.
Also, your rear bumper mounts didn't look so bad but you can get complete replacement panels from these guys. Excellent quality and fit. This is
where I am getting a few sections: http://www.wolfparts.com
Are you keeping it a rat or going the full monty? If your going new paint maybe consider acid dipping or sulfar blasting. Here's mine after
dipping:
Good luck.
T54
[ Edited on 4-1-2006 by Turbo54 ]
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
C'mon kids gather round,
there's a new sensation hitting town,
It's moving straight, low to the ground,
it'll pick you up when your feeling down.
|
|
|
Turbo54
Veteran Volks Folk
Posts: 2220
Threads: 268
Registered: July 13th, 2004
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
Mood: Boost'n
|
| posted on January 4th, 2006 at 10:04 AM |
|
|
From the above to this.
[ Edited on 4-1-2006 by Turbo54 ]
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
C'mon kids gather round,
there's a new sensation hitting town,
It's moving straight, low to the ground,
it'll pick you up when your feeling down.
|
|
|
ruckus
Veteran Volks Folk
Posts: 2118
Threads: 165
Registered: June 19th, 2004
Member Is Offline
Location: Osaka, Japan
Theme: UltimaBB Pro Blue ( Default )
Mood: Pretty strong for a chalk-pusher
|
| posted on January 5th, 2006 at 09:49 AM |
|
|
Wow!
Thanks for the offer T54.
It came with heart tail lights but without bulb setup or heart lense so I'll have to get these repro.
I've got correct headlights (pretty sure as the glass is stamped 'bosch') and some later ones for spares.
Bonnet is incorrect (early 60s I think)
Decklid is going to be a big challenge and I'm not too sure how to approach it.
I've got seats for it in Adelaide but I have to get them over to Melb.
I've got the proper doors but one of them needs a big section replaced in it.
I can't afford to go full resto and I'm not going to be too precious about it. I'll get the fundamentals sorted, learn a few things and then
probably move it on to someone else. I'm going OS in a year so I'm still trying to sort out how serious I should be about the whole thing...
starting to think I'm going to have to sell it in a bit or put it in long-term storage.
[ Edited on 4-1-06 by ruckus ]
|
|
|
ruckus
Veteran Volks Folk
Posts: 2118
Threads: 165
Registered: June 19th, 2004
Member Is Offline
Location: Osaka, Japan
Theme: UltimaBB Pro Blue ( Default )
Mood: Pretty strong for a chalk-pusher
|
| posted on January 5th, 2006 at 09:51 AM |
|
|
Oh and thanks to mr bubble head I think the biggest problem (so far) is sorted.
|
|
|
oval TOFU
Son of Jim - Creator of Good
Bitte, ein Bit!
Posts: 2946
Threads: 234
Registered: July 10th, 2003
Member Is Offline
Location: Pt Cookie, Melburg
Theme: UltimaBB Pro Grey
Mood: :booM
|
| posted on January 5th, 2006 at 10:00 AM |
|
|
wish i had heart tail lights..... 
Looks like a decent project Ruckus, when you go away, I think long term storage is the way to go - you'll have put in too much time and effort to
just dish it off to someone else.. good luck!
...and Robert's ya father's brother...
|
|
|
baggedbug68
A.k.a.: jason Conley
Slammed & Awesome Dubber
Posts: 95
Threads: 4
Registered: August 4th, 2005
Member Is Offline
Location: cooma(quite moutain town)
Theme: UltimaBB Pro Blue ( Default )
Mood: custom bugger lol
|
| posted on January 5th, 2006 at 12:53 PM |
|
|
:o i had a 64 that looked worse and i got an expert to look at it and he told me to bin it.(wish i hadn't listened to him now) oh well good luck with
it what ever you do |
|
|
byronbus
Compulsive Aussie Vee Dubber
dsk
Posts: 4204
Threads: 119
Registered: July 16th, 2003
Member Is Offline
Location: Byron Bay
Theme: UltimaBB Pro Blue ( Default )
Mood: dsk founder
|
| posted on January 5th, 2006 at 01:41 PM |
|
|
Ive got a pair of the heart bases and bulb holders, im guessing they are genuine, not nos but in pretty good nick...make an offer, just cluttering up
my shed... also have a solid visor off a 54 beetle...and one of those air things that sit on the top of the window to feed air into the cab, still in
its box
|
|
|
ruckus
Veteran Volks Folk
Posts: 2118
Threads: 165
Registered: June 19th, 2004
Member Is Offline
Location: Osaka, Japan
Theme: UltimaBB Pro Blue ( Default )
Mood: Pretty strong for a chalk-pusher
|
| posted on January 6th, 2006 at 04:39 PM |
|
|
I've got bases but no bulb holders, but I'm guessing you don't want to part out.
|
|
|
byronbus
Compulsive Aussie Vee Dubber
dsk
Posts: 4204
Threads: 119
Registered: July 16th, 2003
Member Is Offline
Location: Byron Bay
Theme: UltimaBB Pro Blue ( Default )
Mood: dsk founder
|
| posted on January 6th, 2006 at 10:45 PM |
|
|
Ive only got bulb holders...u2u me what you want to pay, give vintage in sydney a call and offer a bit less...they are in smick condition...
|
|
|
Rural Baja
A.k.a.: Will Holmes
Custom Title Time!
#tassievwpickers
Posts: 1075
Threads: 122
Registered: January 3rd, 2006
Member Is Offline
Location: NE Tasmania
Theme: UltimaBB Pro Blue ( Default )
Mood: Chop chop
|
| posted on January 9th, 2006 at 12:45 PM |
|
|
Cant wait to see her finished. Good luck mate!
|
|
|
ruckus
Veteran Volks Folk
Posts: 2118
Threads: 165
Registered: June 19th, 2004
Member Is Offline
Location: Osaka, Japan
Theme: UltimaBB Pro Blue ( Default )
Mood: Pretty strong for a chalk-pusher
|
| posted on January 12th, 2006 at 04:25 PM |
|
|
Hey byronbus did you get my u2u?
|
|
|
| Pages: 1 2 3 |
