Hey Folks.
I have decided to sell my stock 1600 Twin Port engine as I don;t really need it in my fleet anymore.
It is in brilliant condition. I have chosen not to tart it up with paint on the tinware ect as at least you know what you are getting. The motor is full turnkey from exhaust through to flywheel. It included all the dizzy, generator, heater boxes, oil bath/catch can, carburter, dog house cooler, tinware etc....
I will happily fully plastic wrap and strap to a pallet for anyone wanting to take it interstate (I am happy to help but you pay freight). Otherwise collection is in Acacia Ridge, Brisbane. We have an engine hoist to get it into bus or tray or trailer. I will give you a pallet too if it helps on the other end.
Asking Price - $1000ono (I am negotiable but I am also asking around that dollars as it is a strong engine that should provide hassle free driving for years to come so long as it is looked after).
My Details - Brad - 0418 708 210.
I have taken some photos but I have also taken lots of videos.
The oil pressure was a nice constant 40PSI.
The Cylinder head pressures were all 140Psi.
The photos explain themselves. The videos I will link to on you tube show the following,
-Starting and Oil Pressure.
-Idle and Revving
-Pressure Test Cylinder 1
-Pressure Test Cylinder 2
-Pressure Test Cylinder 3
-Pressure Test Cylinder 4
Then I have photos too.
Engine 1
Engine 2
Engine 3 (Note Gearbox not included)
Engine 4
68BUS Wolfsburg Wizard
485 posts · joined Jul 2011 ·
1966 Aussie 11 Window
