Hi Guys
Doe any one know it there was much change in stearing boxes from say 61 to 74 (type 1).
I noticed that the pitman arm is a bit longe on a later one (also takes the lager tie rod ends).
Ta
Newt
It is as it is - If you didnt enjoy today, you've missed the opportunity.
'63> are all the same (even type 3) but the pitman arm changes for the steering stop additions in '68 (ball joint)
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
Thanks Matt
Do the '62 and the 63 differ much?
Newt
It is as it is - If you didnt enjoy today, you've missed the opportunity.
The early steering box is a different design and uses a different pitman arm as the box output shaft diameter changed
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
Cheers Matt,
Are the boxes inter changable? (subject to tie rod ends).
Cheers
Newt
It is as it is - If you didnt enjoy today, you've missed the opportunity.
yes mate, interchangable if you keep the appropriate pitman arm, TRE's and make necessary mods for steering lock stops. The early box design is the stronger one.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
Thanks Matt.
It is as it is - If you didnt enjoy today, you've missed the opportunity.
