vwfive Casual Dubber
49 posts · joined May 2012 ·
Hi guys was there ever a 180mm 130tooth flywheel made that could go into a '63 ish 1200 to make it 12v?If so has anyone got one laying around spare?
flywheel question
vwfive Casual Dubber
49 posts · joined May 2012 ·
Sorry about that,got the wrong forum.Thinking about one thing,looking at another,I'm sure we've all done that before.
barls Administrator Causer of Chaos and Mayhem
9,473 posts · joined Jun 2004 ·
Sorted
“We all pay for life with death, so everything in between should be free.” Bill Hicks
the chaos project - click me
the chaos project - click me
vwfive Casual Dubber
49 posts · joined May 2012 ·
Guys, anyone able to help here?Cheers
ragged Just ask if you need HELP!
478 posts · joined Jan 2005 ·
I've never counted the teeth of a flywheel, but you can get 180mm (clutch) in 6 and 12 volt. Then there are two types of crankshafts.
One has a gasket (generally 6 volt) where the flywheel and crankshaft join and the other (generally 12 volt) has an 'o' ring.
The 12 volt flywheel is slightly larger than the 6 volt, so a 6 volt bell housing will require clearancing if installing a 12 volt flywheel.
Not sure if this answers your question? Dave
One has a gasket (generally 6 volt) where the flywheel and crankshaft join and the other (generally 12 volt) has an 'o' ring.
The 12 volt flywheel is slightly larger than the 6 volt, so a 6 volt bell housing will require clearancing if installing a 12 volt flywheel.
Not sure if this answers your question? Dave