Full flow oil filters

vduboy Insano Dub Head

702 posts · joined Oct 2012 · 9 Apr 2014, 8:02 pm

#988317

Hi guys, just after a little advise from those who use full flow filter set ups. What filter is easily available to use? I believe it is a 3/4 thread. Will a run of the mill z9 be up to the task? Or is burst pressure something to be wary off? Cheers guys!

It will all be OK in the end, if it's not OK it's not the end!

matberry Moderator Go hard or go home

8,114 posts · joined Mar 2006 · 9 Apr 2014, 10:59 pm

#988329

Plumb after cooler to reduce burst issues and I use Mahle OC28 that suit type 4 engine Kombi etc. for increased filtration but yes, a Z9 will fit.

Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE

DakDak67 Officially Full-On Dubber

208 posts · joined Sep 2011 · 10 Apr 2014, 9:38 am

#988340

Another good option is the K&N HP 3001 , can be found at any autostore , http://www.knfilters.com/search/product.aspx?prod=hp-3001

vduboy Insano Dub Head

702 posts · joined Oct 2012 · 10 Apr 2014, 9:44 am

#988341

Awesome many thanks for the replies guys, I will try and hunt down the quickest option, want to hear this run again.. it's been too long!

It will all be OK in the end, if it's not OK it's not the end!