This is some thing I have been working on for a while. I find with conversions you need to be able to get a bead on the end of pipe work to help keep hoses on.
Made this from a standard scissor jack(VS Commodore) which had been damaged. The shafts are from alternators, as are the bearings and the spacers between them. The forming roller is just another spacer which was let spin on the shaft as I ground it to profile(watch you fingers it get hot while you profile it). The ring which holds the former on is from a beetle generator, it has an interference fit on the shaft.
This is Mark 2, is has internal bracing to stop the forming roller from trying to pivot away from the work piece. The small tubing is 32mm stainless tube 1.6mm wall thickness, I previously had to anneal the tubing and it was still a difficult job. Now it breezes through it.
mackaymanx Custom Title Time!
1,611 posts · joined Jan 2006 ·
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
[IMG]https://www.vw-mplate.com/mplate2-18600.png[/IMG]
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
[IMG]https://www.vw-mplate.com/mplate2-18600.png[/IMG]
