semi automatic pipe locations and wiring

kombi_kid Moderator Good Kid too many projects

124 posts · joined Aug 2002 · 22 Oct 2015, 5:04 pm

#1020167

Hey
have come to the point i am reinstalling the motor into my semi autromatic beetle and need to reconnect all the pipes stupid me forgot to take photos of everything so need a few pics etc of how everything connects up both wiring and pipes.
any help would be greatly appreciated
cheers
rhys

it aint just cool its aircool'd

grumble Son of Jim - Creator of Good

2,672 posts · joined Jun 2008 · 22 Oct 2015, 8:16 pm

#1020181

Rhys text me your mobile No and I will send some pics on the phone tomorrow, 0408 025 845 Cheers Les

kombi_kid Moderator Good Kid too many projects

124 posts · joined Aug 2002 · 23 Oct 2015, 5:50 am

#1020187

Will do have you replaced the torque converter seal?

it aint just cool its aircool'd

grumble Son of Jim - Creator of Good

2,672 posts · joined Jun 2008 · 23 Oct 2015, 2:07 pm

#1020203

Yes the converter just slips back off the splines,the seal mounts on the hub on the flange outside of the splines. Be careful fitting the seal as it s easy to distort it,when you remove the converter measure the depth in the bell housing prior to pulling it out and when you refit it make sure it goes back in 3 steps to the same depth.