2109 vs 2110

bronte17 Casual Dubber

29 posts · joined Nov 2009 · 24 Jul 2016, 12:27 pm

#1028394

Hi guys looking for some feedback on building a 2109 (76x94) or a 2110 (82x90.5) I like the sound of the 2109 as the stroke is shorter with less case work.

Any body had experience with both? Engine is for a 71 super street car.

Bizarre Moderator The artist formerly known as blue74l

12,785 posts · joined Aug 2002 · 24 Jul 2016, 1:07 pm

#1028396

If your going to that trouble go 82 x 94

My mate has built several of these with great results

Effort and cost is in the fuel delivery

IDA or injection?

Futue te ipsum!!!

bronte17 Casual Dubber

29 posts · joined Nov 2009 · 24 Jul 2016, 1:59 pm

#1028397

Thanks. It seems the more common combo. Injection would be nice but budget probably won't stretch. CB kits look good as do the weber kits but I think I will stick with 44idf,s

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 24 Jul 2016, 2:54 pm

#1028398

shorter stroke is better less case work

BUT as per above you might as well go 82 x 94 you may need 48s to get the best out of it or injection which will cost around 5K

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

bronte17 Casual Dubber

29 posts · joined Nov 2009 · 24 Jul 2016, 4:10 pm

#1028401

What's the difference between 'A' and 'B' Pistons in 94mm

cnfabo Custom Title Time!

1,353 posts · joined Apr 2008 · 24 Jul 2016, 4:35 pm

#1028403

b pistons are shorter.for longer crank stroke..to keep the engine narrower and helps fit in std engine bay etc..other variables apply..if the engine's cc is close regardless of crank pistons combo they will make similar power.id go 78 or 82 x94's.if its a street engine id use 44idfs.but all depends on heads and cam etc etc.have a search around but dont get too confused and suked in by all the wank factors etc.it should be be a relative easy decision on what size to go.dont get siked in by bug hp numbers either🙅...

Fabo

hus22l Officially Full-On Dubber

229 posts · joined Apr 2012 · 25 Jul 2016, 7:18 am

#1028432

Either way you will most likely need B Pistons. Using A Pistons you might need to clearance the piston skirt. To a large extent it will also depend on your rods as to how much clearance get you need to do. Longer stroke might also mean clearance get the cam.

But arguably the 90.5s run cooler?

Have a look at some build sheets / diaries (with photos) here or on the samba and you can get an idea of the work involved.

bronte17 Casual Dubber

29 posts · joined Nov 2009 · 27 Jul 2016, 9:21 pm

#1028536

Thanks for the info and views. Some reading on the Samba to come.

cnfabo Custom Title Time!

1,353 posts · joined Apr 2008 · 28 Jul 2016, 8:07 am

#1028542

bronte17 wrote:Thanks for the info and views. Some reading on the Samba to come.

Dont get caught up in it all on the samba either.
Good luck
Fabo