Aussieveedubbers

Ratio rocker set up

0 likes

hus22l Officially Full-On Dubber

229 posts · joined Apr 2012 · 2 Sep 2016, 9:04 am

#1029598

hey all,

I'm setting up new 1:1.25 rockers (adjuster at the pushrod end). My side clearance is excessive. I need to add shims to bring into range (0.003-005").

Can I use the shims/washers from a stock rocker set up? (Obviously not the wavy ones) Or are these more like washers than shims?

If I'm better off getting specific shims, anyone got some spare shims they don't need?

Any suggestions?

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 2 Sep 2016, 3:33 pm

#1029615

get the correct shims

the stock ones sometimes don't fit he new ratio shaft as they are slightly bigger

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409