jaycar ignition and 009

bus914 Custom Title Time!

1,230 posts · joined Aug 2002 · 19 Sep 2003, 9:25 pm

#88844

anyone know if this: www1.jaycar.com.au/productView.asp?ID=KC5247 would burn out the resistor in a 009 rotor button?
(it's inductive i think, not a CDI)

TIA

[img]https://i4.ytimg.com/vi/KOKlJpsfCyk/default.jpg[/img] Click the thumbnail for video👍

KruizinKombi Seriously Obsessed Cyber Dubber

3,493 posts · joined Aug 2002 · 20 Sep 2003, 1:00 pm

#89009

I don't know, but I doubt it. It is after all, designed to be run with as many different ignition types as possible. I see no reason why the 009 should be different. 🙂

Kruizin Kol

toplessbug Fahrvergnugen

879 posts · joined Aug 2002 · 22 Sep 2003, 10:05 pm

#90129

yep certainly will the best thing to do is grab a bit of sheet brass and dig out the resistor then replace it with the brass ,solder it in place then stick a bit of good epoxy over the center of the brass plate you just soldered in there to hold it all together, another thing have a good look at your leads as the enhanced spark will fix them up as well:beer:beer:beer:beer:beer:beer:beer:beer:beer