Skip to content
Aussieveedubbers

IRS Trailing Arms

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

blup58 Officially Full-On Dubber

216 posts · joined Oct 2002 ·

#8675
G'day Guys/Gals

I recently purchased a set of IRS bits and bobs for my Swing Axle to IRS conversion, and to make them look the part I am intending to get them powdercoated. But before I do this I need to remove (I have no idea what it is called) the rubber and metal sleeve that the pin goes through connecting the trailing arm to the pivot boxes.

Is there a trick to getting these out or do I just need to force them out with a press???

Any advice would be great

Cheers

Brad

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#8703
Push them out. Make sure they mask up these areas as you dont want any paint inside these areas where the bushes sit.
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409