hey guys whats the foam in these aftermarket units?
I went up to a foam place and they said that they dont carry this and reckon that there is none(dumb twats:cussing)
so has anybody replaced this before??
rob
It is really just there to catch the oil in the mist and stop it being blown away. As the sponge gets full it falls out and is suppose to drain back.
Usually ends up spilling every where.
Another idea is get a couple of those stainless steel scourer things and open them up. Pack the box with them instead. They will catch the oil and wont fill up like a sponge.
I have the CB style and it just has baffles in there. Does the same job
Ooops .... whats the foam..... not ....whats it there for..... oh well
Futue te ipsum!!!
Try to find air cleaner foam otherwise.
As long as the foam is resistant to oil (upolstry foam isn't and is 'open' as in it will allow air through it.
Some foams are closed so won't breath.
I'd use the stainless scourer as you can easily wash out and reinstal. It's only there as Blue said to pull the oil out of suspension.
Spyder-WISD 07-09-05 11.6s @ 125 MPH
Speedster-WISD Nats 05 14.4s @ 89 MPH
Jet cruiser-Coogee 22-09-05 900 deg C @ 110,000 rpm
Weaseling out of things is what separates us from the animals....................Except the Weasel.
OK:thumb I'll give it a go then.thanks guys!
:beer:beer:beer
