Quoll Officially Full-On Dubber
232 posts · joined Jan 2003 ·
What kind of work it involved getting a 1776 or larger pistons to fit a case/heads and how much does it cost?
Machine work
whatnow Custom Title Time!
1,000 posts · joined Jan 2003 ·
to fit bigger p&c you need to get the case and the heads machined to a larger diameter (it is best to get the case "decked" so you have a perfectle flat surface to mount the p&c on)
as for $ i think it is in the region of $300... (including the "decking") could be more, it is a while since i got a quote.
while you are at it you may as well get the heads cut to the depth you want for your desired compression.... it'll save having to get the heads machined again.
as for $ i think it is in the region of $300... (including the "decking") could be more, it is a while since i got a quote.
while you are at it you may as well get the heads cut to the depth you want for your desired compression.... it'll save having to get the heads machined again.
vw54 Administrator Always Waiting 4 Friday
16,723 posts · joined Aug 2002 ·
Of course this means completely stripping the engines and cleaning it as well So while your tehre you replace all the gasket, push rod tubes, bearings, valves and valve guides, heads ?? etc etc etc so it a bit more than the 300 for the machining
I read it on FACEBOOK so it must be true
http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630
http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099
http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603
http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409
http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630
http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099
http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603
http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409