oil pump removal

183 posts · joined Nov 2002 · 14 Feb 2004, 3:07 pm

#139569

just brought a heavy duty pump with filter, how's the easist way to remove old pump with out breaking the case? - need any special tools, any ideas.....

Thanks
John

Bizarre Moderator The artist formerly known as blue74l

12,785 posts · joined Aug 2002 · 14 Feb 2004, 4:07 pm

#139586

Hmmm..... "can" be done in car.

You need to get the pulley off.
BIG spanner.

then you need to get that bit of tin off.

Then the cover to the pump, and take out the drive gears.

You then get a special puller thing that hooks into the 2 holes and you do up the nut and it pulls the pump out.

Easy - :o

Ummm..... you "do" know what cam you have?
deep dish or not?? 😀

Futue te ipsum!!!

mountainbug LindaLop

183 posts · joined Nov 2002 · 14 Feb 2004, 5:15 pm

#139607

blue
motor is out of car, gears removed, not sure about cam, when you say deep dish, pls explain. know were i can get pully from....measured slot (depth) that goes in cam, new one 10mm, old one 8mm. same thickness

thanks

70AutoStik Insano Dub Head

730 posts · joined Aug 2002 · 15 Feb 2004, 10:19 pm

#140138

You'll need to have the later-style 3 bolt cam (or any performance cam) to use your new pump.

I would recommend buying/borrowing the special tool for this job. Don't try to pry it off with screwdrivers or the like - it _will_ end in tears.

mountainbug LindaLop

183 posts · joined Nov 2002 · 16 Feb 2004, 10:19 am

#140282

can someone tell me the difference between the two?

mountainbug LindaLop

183 posts · joined Nov 2002 · 3 Mar 2004, 8:17 pm

#146551

with that amount of information.... I'll be on to it.