(no subject)

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 27 Nov 2002, 10:16 am

#12006

If the cable has not broken then the stock level is inside the glove box. If its broken then follow below.

done this myself.

Pull the front bumper and crash bar off. then you have 2 holes either side to stick a long screw driver or lever up to the underside of the latch to pop it.

go and buy an aftermarket bonnet cable pull and install that under the glove box area. remove the old one from the glovebox cause there junk.

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

Hutcho Wolfsburg Wizard

528 posts · joined Aug 2002 · 27 Nov 2002, 5:29 pm

#12096

hehe... god luv volkies!!

Quickbug Officially Full-On Dubber

363 posts · joined Sep 2002 · 27 Nov 2002, 9:07 pm

#12163

ADZ!!

Pull the lever in the glovebox!!
It worked last time i used it!?!?!

😀

http://au.geocities.com/imgoindahell/Thumper.html

KruizinKombi Seriously Obsessed Cyber Dubber

3,493 posts · joined Aug 2002 · 27 Nov 2002, 9:40 pm

#12169

Nothin wrong with original ones!!

Kruizin Kol

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 28 Nov 2002, 7:01 am

#12217

yeah nuthing wrong with the stock bonnet pull,

except when they pull through or break off the cardboard glove box, then yr stuck:puke:puke:puke:puke:puke:puke

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409