Ok for all those out there that are doing or thinking of putting a subi into something I have found a place who just takes your box of wiring from your front cut and for around $350 give it back to you converted and labled and ready to install or they will do the whole thing for you. They were very helpful so far and I should get mine back soon so I will let you all know how it goes.
They are PerFOURmance Motor Sports at sprinwood in brisbane and if you like you can call them on 07 38084244 or try
www.pms.net.au
Cheers
Andy:thumb:thumb
[Edited on 10-3-2004 by Andy42]
[Edited on 23-3-2004 by Andy42]
.
Could be handy to know,
Thanks :thumb
Thanks Andy, I was just thinking today the fun I am going to have with the EJ20T 1/2 cut arriving tomorrow. I'll give them a call.
cheers
Spyder-WISD 07-09-05 11.6s @ 125 MPH
Speedster-WISD Nats 05 14.4s @ 89 MPH
Jet cruiser-Coogee 22-09-05 900 deg C @ 110,000 rpm
Weaseling out of things is what separates us from the animals....................Except the Weasel.
Hey Andy,
i assume that they'll do any version of a Suby engine? And what do they need from the old engine/vehicle for reference? Do they just need a wiring diagram? Do they need the old loom?
Thanks,
Andy.
[Edited on 10-3-2004 by type2nut]
I suggest you contact them directly..
From what I can tell they do any subie engine and has a test bourd and all for them. They specialise in putting Four cylinder suabru engines into anything the customer wants and from all reports and very good at what they do.
They will need / preffer the complete loom so unless you know what you are doing I reckon doing like ANdy and giving them a big ass box of everything and smilling as you walk out the door is the best way to go.
Once Andy has his loom back I am sure photos will follow.
I just spoke to a guy who got his loom done there for some weird ass kit car and he is anal as. Anyway the result was a big grin and the best money he ever spent ..
Just so no one gets the wrong idea, there is no affiliation here just people happy to find and auto elec with the balls to give it a go at a good price and quality level.
Maybe they will do my KLZE for me if I tell them it is almost an EJ :o
Brad
Why copy when you can own an original ?
Meyers Manx AustraliaI am sure they do any subi ones. If you check out their website they have some sick vehicals😀 All I gave them was a big box with every wire and teh computer that came from my front cut. I am sure if you had no wiring they could still make you one up but at a price a guess. They are very easy to deal with and I found they spent the time to tell me exactly what i needed and what I would get.
Prety much Just what Brad said 😀
Oh and they did mantion teh VP rally Ute is for sale CHEAP if anyone wants it.
[Edited on 10-3-2004 by Andy42]
.
n/a loam in a box and send it over on Monday
If only I found a wiring diagram for a n/a motor.
seagull:alien
Looking for that special lady : PM me for coffee & cake
People I don't understand EXACTLY what this service offers! 🙁
If you send them an ECU and loom, they send me backwhat exactly, the ECU and
the loom with all unwanted wiring removed and all remaining wires labelled?
Someting other than this?
Thanks,
Andy.
what they will do is to take you box full of wirring and remove all unwanted wirring and to make it run with out speed sensors if the vehical has them. It is ready to plug and play and then they lable the remaining few wires wich will go to your existing loom. Like ignition etc
.
This sounds like a good place to remember. Will save people doing this conversion a heap of head banging against the wall and pulling any remaing hair from their scalp.
Da Time For The Aircooled Revolution Is Upon US.
Brothers & Sisters Lets Hit The Streets, Roll As One. And Feel The Power Of The Aircooled Storm.
Andy42, you have made me a happy man!
Thanks for the info 😀
Andy
Called them today and will be sending my birds nest up for them to sort for me. I'll give them a mud map of the Spyder with the diamentions on it for ECU location etc and they will send me back a nice loom with all I need on it........ :thumb
He said he has just got another to do, EJ20T into a buggy? He wanted to know where they were all coming from?
Cheers Andy.......
Hmmmm.......wouldn't mind the stroked 2.5 engine kit as well!
[Edited on 15-3-2004 by speedster356]
Spyder-WISD 07-09-05 11.6s @ 125 MPH
Speedster-WISD Nats 05 14.4s @ 89 MPH
Jet cruiser-Coogee 22-09-05 900 deg C @ 110,000 rpm
Weaseling out of things is what separates us from the animals....................Except the Weasel.
yeh I recon they might get a bit of work from the vw people doing conversions. They make it all sound so easy don`t they? :thumb Oh the ej20t into a buggy may be my loom as they said it would be the start of this week when they would get onto it. :thumb
[Edited on 15-3-2004 by Andy42]
.
ok here are some pics of it done.
.
another
.
ok another and teh only thing i wish I had done was to get it shortend from teh origanal length. Oh and I wish teh wirring loom was not cut in half to begin with as they had to rejoin it and teh joiners are not great quality🙁 But both my fault. And all in all I am happy with it :thumb
.
Another place that does great work is Sunspares. 07 5472 7222
Spyder-WISD 07-09-05 11.6s @ 125 MPH
Speedster-WISD Nats 05 14.4s @ 89 MPH
Jet cruiser-Coogee 22-09-05 900 deg C @ 110,000 rpm
Weaseling out of things is what separates us from the animals....................Except the Weasel.
i have sent mine to day ,hope to have it back in two weeks ,seagull
Looking for that special lady : PM me for coffee & cake
for any of those interested this is how much was NOT needed. :thumb
.
Ok I give up .....
I have been building looms and circuit boards for years and I just can't seem to figure out what the thing in the middle is that looks like a can of lift... More to the point how will you car run without it ? I thought they were very important :P
Brad
Why copy when you can own an original ?
Meyers Manx Australiawe have converted it to run on Cherry Coke now :thumb
.
any more photos andy ? hows it looking seagull
Looking for that special lady : PM me for coffee & cake
