Do ya's think this is too low?
Cheers
Marc
[Edited on 13-5-2004 by 59 BUS]
59 BUS Seriously Crusin Dubber
170 posts · joined Mar 2003 ·
1 attachment · Log in to view
Too Low? Never! *Now With Video*
gayanne Officially Full-On Dubber
307 posts · joined May 2004 ·
59 BUS wrote:Do ya's think this is too low?
Cheers
Marc
5PL1TDCS10N Insano Dub Head
845 posts · joined Jan 2003 ·
uhmmm....no???
there is still about 2mm ground clearence cuz!
W 😉
there is still about 2mm ground clearence cuz!
W 😉
MikeM Buggy Head
1,429 posts · joined Aug 2003 ·
That sway bar is certainly a street sweeper.
Indian Automotive make a sway bar that does not get lower as the car does.
Indian Automotive make a sway bar that does not get lower as the car does.
kruizinwagon.com.au
You'll notice as the front end gets closer the ground, so does the standard sway bar, because of it's shape. We use one that is fastened to the beam and it stays away from the road, a real plus.
Support BuggyFest sponsors
http://www.shannons.com.au/
http://www.crankykits.com.au/
http://www.customveedub.com.au/
http://www.ozbuggies.com.au/
BiX Veteran Volks Folk
2,499 posts · joined Sep 2002 ·
mmmmmm mabye a little low, but who cares, aslong as it looks and or handles well!!!1
I have no sympathy for my car, only the wallet that pays for it!
Go hard or go home!!!!
Go hard or go home!!!!
pod i`ve got to finish this thing one day
4,980 posts · joined Dec 2003 ·
jees i thought not being able to get my trolley jack under was low but wow could go a tad lower 🙂😉
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook https://www.facebook.com/FlatFour
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook https://www.facebook.com/FlatFour
Adam_C Custom Title Time!
1,180 posts · joined May 2003 ·
just piss the sway bar off.... not like theres much bodyt roll..... or high speec cornering when you r that low 😀😀😀😀 ...... as soon as i pass this bloody blue slip i shal join you down there ... in those weeds 😀
Kai.A. Fahrvergnugen
915 posts · joined Sep 2003 ·
looks great to me... just bin the anti-roll bar, it's no use to ya anyway.....
kai😎
kai😎
twoguns simply aircooled
4,275 posts · joined Nov 2002 ·
hey marc. damn fine mate. u2u me your address and i will send off that extra sticker for ya!
Simply Cruzin'...
ikube Wolfsburg Wizard
580 posts · joined Feb 2004 ·
go go go ! Go Low ! :thumb :thumb :thumb
Southern Van Officially Full-On Dubber
243 posts · joined Apr 2004 ·
Marc,why dont you post a pic to show where the front bumper is?
Daniel Seriously Crusin Dubber
191 posts · joined Oct 2003 ·
Or even a pic of the whole thing! (or are they somewhere on the site already?)
nicko Officially Full-On Dubber
389 posts · joined Mar 2003 ·
How did you get it that low?
59 BUS Seriously Crusin Dubber
170 posts · joined Mar 2003 ·
A pic for you Southern Van
1 attachment · Log in to view
Daniel Seriously Crusin Dubber
191 posts · joined Oct 2003 ·
Awesome, I like your mirror too.
And how does it ride down there. I have to do some creative driving sometimes in mine, but it isn't as low as yours. You must drag the roadkill round with that swaybar! 😀nicko wrote:How did you get it that low?
pyr0 flame-on
4,457 posts · joined Mar 2003 ·
thats awesome dead set mate that is one mean ride stance..... the only prob is i dont think you'd be able to get in to macca's 🙁
Founding member of the C'town Rat-Pack
59 BUS Seriously Crusin Dubber
170 posts · joined Mar 2003 ·
I was driving into Macca's at Maroochydore on the Sunshine Coast (the one near Cotton Tree) and it has a real steep angle to drive into, so I thought no problem i'll just take it an an angle, but it was too steep and I lifted the front right tyre and the rear left which was just spinning free, I has to get one of my mates to push a bit so I could get some power to the ground, made a good screech I tell you!
59 BUS Seriously Crusin Dubber
170 posts · joined Mar 2003 ·
Daniel Seriously Crusin Dubber
191 posts · joined Oct 2003 ·
Damn!!!!!
That first bit as it's turning in looks like it's sliding 😎
That first bit as it's turning in looks like it's sliding 😎
bugger Commited Dubber
71 posts · joined Oct 2003 ·
The hights just right, unless you have to drive over gravel. Pot holes must be a real bitch.
Seriously... That is one Sweet ride!
Seriously... That is one Sweet ride!
Commited dubber..... My wife thinks I ought to be commited!
Secoh Fahrvergnugen
926 posts · joined Sep 2002 ·
hey, do you have a blue and white splitty too? I swear I saw them both parked on the street in Brisbane near kangaroo pt when I was up there visiting a mate! (I took a pic for the forums the day before my camera got nicked at Jamboree 🙁)
If it aint broke,
Make it go faster!!
Make it go faster!!
59 BUS Seriously Crusin Dubber
170 posts · joined Mar 2003 ·
Yes that would have been me, the blue and white is a friends bus. They do look good parked together!
BenettonVW Administrator AVD Forum Founder
3,125 posts · joined Aug 2002 ·
Thats the spirit.. Nice height.. You could always narrow the beam..
THE LOWEST WITH THE MOSTEST BLING BLING WINS!!
Cruzin in a Golf Wolfsburg Wizard
406 posts · joined Oct 2003 ·
wouldnt want to ignite ur tyres or anything else for that matter frenzix....i love the look of the ride 59 Bus. What engine you running in that?
<hr>"I choose to Cruze VW Golf Mk1 Style!!!"
MikeM Buggy Head
1,429 posts · joined Aug 2003 ·
Hmm. That would be cool. But don't bolt sheets of metal under there get up a couple of pieces of flint stone and hang them down on springs so they occasionally hit the ground. The springs with absorb the shock so it's not transfered to the car and the flint stone will shower sparks out the back.frenzix wrote:it's not low enough. I see no sparks. Me and a friend were thinking it would be funny to make a couple of brackets for under the bus so you can bolt sheets of metal on and drive around with constant sparks, then replace as needed. Only for bus's like this though.
Support BuggyFest sponsors
http://www.shannons.com.au/
http://www.crankykits.com.au/
http://www.customveedub.com.au/
http://www.ozbuggies.com.au/
KruizinKombi Seriously Obsessed Cyber Dubber
3,493 posts · joined Aug 2002 ·
That height looks awesome!! I'd be worried about turning into driveways though... do the fronts rub when turning on uneven ground?
Kruizin Kol
59 BUS Seriously Crusin Dubber
170 posts · joined Mar 2003 ·
I don't have any tyre rub problems at all (yet), I do run 45 profile fronts though!
The motor is a 1641 with a mild cam, smooth motor but there are plans for either a well hidden WRX motor or a 2.7 flat six corvair which is already in my shed!
The motor is a 1641 with a mild cam, smooth motor but there are plans for either a well hidden WRX motor or a 2.7 flat six corvair which is already in my shed!
Da Wiz Officially Full-On Dubber
330 posts · joined Dec 2002 ·
more video!!!! 😀
:bounce:bounce:bounce
[Edited on 14-5-2004 by Da Wiz]
:bounce:bounce:bounce
[Edited on 14-5-2004 by Da Wiz]
¯`·.¸¸.·´¯`·.¸¸.-> Keepin' it Real !!
59 BUS Seriously Crusin Dubber
170 posts · joined Mar 2003 ·
I don't have any more yet. I'll see what I can do!
Secoh Fahrvergnugen
926 posts · joined Sep 2002 ·
they looked awesome together! To the point I locked up in the street in order to stop and take the pic! 😀59 BUS wrote:Yes that would have been me, the blue and white is a friends bus. They do look good parked together!
If it aint broke,
Make it go faster!!
Make it go faster!!