cumonghia Commited Dubber
70 posts · joined Mar 2004 ·
if everything else is new, clutch, fly wheel, etc, and there is a slight shudder on take off, is that because I should have replaced the throw out bearing too?
Thrust bearing
pod i`ve got to finish this thing one day
4,980 posts · joined Dec 2003 ·
could be wrongly adjusted
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook https://www.facebook.com/FlatFour
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook https://www.facebook.com/FlatFour
Bizarre Moderator The artist formerly known as blue74l
12,785 posts · joined Aug 2002 ·
could be several things
Bowden tube set wrong
pressure plate warped
fly wheel warped
pressure plate not done up tight.
Dont think the throw out bearing would cause shudder though?
Would be more things to do with when the clutch plate come in contact with the pressire plate.
Throw out bearing is more when you put your foot on the pedal to engage the clutch
Bowden tube set wrong
pressure plate warped
fly wheel warped
pressure plate not done up tight.
Dont think the throw out bearing would cause shudder though?
Would be more things to do with when the clutch plate come in contact with the pressire plate.
Throw out bearing is more when you put your foot on the pedal to engage the clutch
Futue te ipsum!!!
56astro Custom Title Time!
1,772 posts · joined Aug 2002 ·
Gearbox mounts loose/busted??
VW car, VW engine ...... keepin it "real"
35MPG on 101.3kPa
cumonghia Commited Dubber
70 posts · joined Mar 2004 ·
Everything is brand new, mounts the lot, I didnt realise the bowden tube could cause a shudder. that would be the simplest fix, fingers crossed its that. its only slight and if you get up it a bit it doesnt do it.