Relase bearing? T4 onto T1 G/box

s1fter Slammed & Awesome Dubber

98 posts · joined Jan 2003 · 13 Jul 2004, 10:34 pm

#202742

I am putting a 2.0 ltr T4 into a Splity Pick up that I have fitted a T1 (1969) 1500 gear box into (Lowers the bus, as you loose the reduction boxes).
I have read, but have not found full info that you can or how to(?) use the "Pad" from a T1 PP and fit it onto the T4 PP? does anybody know about this?
The other way is to use a bearing guide tube from a T1 72> G/Box, how do you attatch this to the 1500 (1969) T1 Gear box?

Many thanks for your time.

s1fter

Our site

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 · 13 Jul 2004, 11:36 pm

#202754

Hi

If your using a diaphragm pressure plate I don’t think there is any way to fit a pad to the fingers, it might be best to speak to a clutch specialist. Are you using the Kombi flywheel? The later release bearing guide tube mounts on 3 x 6mm studs in the bell housing, there is casting for this, it would be hard to reproduce this and keep the tube centralised, the 71 & later 1300 twin port trannies have this guide.

1302Steve

Dasdubber DAS Resto Haus

5,746 posts · joined Aug 2002 · 14 Jul 2004, 10:29 pm

#203172

I am installing a 2L typeIV into my beetle (using a 1500 swing axle box).

www.sharpbuilt.com.au sells the brass (or is it bronze?) pilot bushing for around $18 when I bought one - I had this pressed/machined into the 215mm typeIV flywheel I am using. I ordered a throwout bearing adaptor collar from aircooled.net

http://www.aircooled.net/new-bin/viewproductdetail.php?keyword2=CFP0010&cartid=

...which is used to enable the use of the typeIV clutch and pressure plate. I had the box rebuilt at the time so made installing this collar convenient.

cheers
alan

www.dasrestoparts.com.au

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 · 14 Jul 2004, 11:14 pm

#203214

Hi

The collar from aircooled net looks great. I used a stock needle roller bearing in my flywheel, I just had the centre of the flywheel turned out to fit it..

1302Steve

s1fter Slammed & Awesome Dubber

98 posts · joined Jan 2003 · 15 Jul 2004, 11:59 pm

#203657

Thanks guys, I think I will go for the part from Aircooled net. looks just what I am looking for.

arrr this forum is great for quick on the spot correct answers.

One happy poster

s1fter

Our site