Skip to content
Aussieveedubbers

PLEASE HELP!!!! lowering my beetle

0 likes
Share Share on Facebook Share on X Share on Reddit

Ross Seriously Crusin Dubber

108 posts · joined Apr 2004 ·

#210172
Ha all
I have just lowered the rear of my 61 beetle another inner notch (it was lowered one notch when i bought it) to find that it now makes an awful sound in the rear like it's bumping out, i left the rear bump stops out.
My question is... if i place the inner spline to the original position (stock height) and then adjust the OUTER spline to lower it....will this fix the problem?????
I have done this mod so many times and never come accross this problem!!!

[Edited on 31-7-2004 by Ross]

Adam_C Custom Title Time!

1,180 posts · joined May 2003 ·

#210299
okay, heres the deal, i dont know how to do the inner splines, but asfar as i know the inner splines lower/raise the car less that the outer, therefore 1 notch on the outer drops more than 1 inner notch, if you put ur bumpstops back on cut them down, i put them back on my car recently as it is 3 outer splines lowered and raised it a tad, so my suspension is pretty much just the bumpstops....... looks over ride comfort 😉

im guna cut more than the 1/2 inch out of the bumpstop to drop it down a little to level it out a tiny bit...... so take a hacksaw or utility knife trum the bumpstops and put em on, lifts it up a bit and acts as a little bit of shock absorbing hehe

goodluck mate

[Edited on 1-8-2004 by Adam_C]
Adam
Adzslick@iprimus.com.au