Skip to content
Aussieveedubbers

Cleaning a transmission case

0 likes
Share Share on Facebook Share on X Share on Reddit

geodon Wolfsburg Wizard

478 posts · joined Aug 2002 ·

#18090
I'm trying to remove 40 years build-up of oil & dirt from a kombi transmission. This stuff laughs at high pressure hot water & just clogs my wire brushes & flap wheels. I'm having a bit of success using a hot air gun & scraping but it's very slow. What's next- an LPG torch & burn it off??

Andy Andy\'s Adventures

2,820 posts · joined Nov 2002 ·

#18165
Yes, That's also been my experience. Lot's of Kero, and plenty of elbo grease. I also find a good blunt knife or paint scraper does a good job without scratching. Once most of the gunk is off, it's then a wire brush or scouring pad ( the stainless steel kitchen type).
Andy.

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#18173
Theres is NO easy way to clean off VW gearbox gunk.

just plan to be there with a blunt knife, scraper, screw driver wire brush and ELBOW grease for afew hours.

preferable somewhere in the shade. I usually do mine in the afternoon down the side of the house... when the sun has gone over... nice n shady
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

Che Castro ankle straps

1,945 posts · joined Aug 2002 ·

#18324
i used a screwdriver and a paint scraper thing... and i used newspaper, still got a couple of crap black marks on garage floor tho
Jon