Guys,
Does anyone have a removable rear apron/ducktail to sell. Who in Sydney sells them?
Thanks Matt
0416 115993.
boof2332 Custom Title Time!
1,210 posts · joined May 2004 ·
WTB...rear apron for 68 or similar.
1303Steve Scirocco Rare
8,650 posts · joined Aug 2002 ·
Hi
You can buy new ones from most VW shops but they are weld on. Its up to you to make it removable. Im going to make my rear end lift off like a baja.
Steve
You can buy new ones from most VW shops but they are weld on. Its up to you to make it removable. Im going to make my rear end lift off like a baja.
Steve
ClassicVW(pacific) Custom Title Time!
1,627 posts · joined Jul 2004 ·
hope this helps
The one as above with no tail pipe cuts $58
Repro flat type $47.50
Genuine bulge type $75
The one as above with no tail pipe cuts $58
Repro flat type $47.50
Genuine bulge type $75
vw54 Administrator Always Waiting 4 Friday
16,723 posts · joined Aug 2002 ·
Available from Vintage at Campsie 9789-1777
I read it on FACEBOOK so it must be true
http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630
http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099
http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603
http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409
http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630
http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099
http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603
http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409
boof2332 Custom Title Time!
1,210 posts · joined May 2004 ·
Thanks Guys,
Mine was cut out when I removed the back to put in the motor...it was bogged up and in average condition and I am finding it hard to get it nice....especially as the car will be black. I too will just bolt it into place off the gaurds so it is removable.
I have a massive piece of polyuretheyne at home that sits on the back of the car and have started moulding a complete rear end similar to the new bug....My mate made Darth Vaders suite in star wars and used to make kits....when everything else is done I will keep going with it.
Matt
Mine was cut out when I removed the back to put in the motor...it was bogged up and in average condition and I am finding it hard to get it nice....especially as the car will be black. I too will just bolt it into place off the gaurds so it is removable.
I have a massive piece of polyuretheyne at home that sits on the back of the car and have started moulding a complete rear end similar to the new bug....My mate made Darth Vaders suite in star wars and used to make kits....when everything else is done I will keep going with it.
Matt