kitekombi Casual Dubber
47 posts · joined Dec 2004 ·
My linkages are stuffed on my 73 micro'. Has any one found good aftermarket ones or do i need to try and make my own??
accelerator pedal linkages
kombibob AKA: Volkswagen Type 2 Transporter Van Robert
1,698 posts · joined May 2004 ·
why kitekombi your not a kitesurfer are you?
1961 swb buggy
1960 karmann ghia
1963 Single Cab: "El Concreto"
1963 bent 23 window " Frieda Samba "
1963 Eriba Faun camper " Cara Van daCamp"
2012 Skoda Octavia scout
Get down low and go,go,go
1960 karmann ghia
1963 Single Cab: "El Concreto"
1963 bent 23 window " Frieda Samba "
1963 Eriba Faun camper " Cara Van daCamp"
2012 Skoda Octavia scout
Get down low and go,go,go
kitekombi Casual Dubber
47 posts · joined Dec 2004 ·
sure am. Best thing ive done..so far
kombibob AKA: Volkswagen Type 2 Transporter Van Robert
1,698 posts · joined May 2004 ·
me too i'm a team rider for caution kites where are you from?
1961 swb buggy
1960 karmann ghia
1963 Single Cab: "El Concreto"
1963 bent 23 window " Frieda Samba "
1963 Eriba Faun camper " Cara Van daCamp"
2012 Skoda Octavia scout
Get down low and go,go,go
1960 karmann ghia
1963 Single Cab: "El Concreto"
1963 bent 23 window " Frieda Samba "
1963 Eriba Faun camper " Cara Van daCamp"
2012 Skoda Octavia scout
Get down low and go,go,go
11CAB If ya got it....Baja it
4,674 posts · joined Aug 2002 ·
Go down to the wreckers and get the linkage assembly from a 77 or later kombi. The pedal is stronger, the linkage pushes straight unlike the earlier ones and the linkage goes across in front of the steering column instead of behind like the earlier ones so you can tell the difference.
65 Meyers Manx
68 Country Buggy (KO 367)
68 Country Buggy (KO 669)
68 Country Buggy (KO 789)
68 Country Buggy (KO 815)
68 Baja Bug
76 Baja Kombi Twincab
68 Country Buggy (KO 367)
68 Country Buggy (KO 669)
68 Country Buggy (KO 789)
68 Country Buggy (KO 815)
68 Baja Bug
76 Baja Kombi Twincab
57 Chook Shed Custom Title Time!
1,021 posts · joined Oct 2002 ·
I`ve got the same problem with my `73 Crewcab.
I tightened it up a bit using some washers in between the flat parts of the linkage and the spring clips that hold them in place. Looks like the hole in the bracket that is welded to the floor has worn oval. I`m getting about 2/3 throttle because of all the wear.
I`m going to cut the bracket off and weld in a couple of washers or a small tube to make the holes round again. I doubt I`ll find a better one at the wreckers.
Cheers
Graham.
[Edited on 5-12-2004 by 57 Chook Shed]
I tightened it up a bit using some washers in between the flat parts of the linkage and the spring clips that hold them in place. Looks like the hole in the bracket that is welded to the floor has worn oval. I`m getting about 2/3 throttle because of all the wear.
I`m going to cut the bracket off and weld in a couple of washers or a small tube to make the holes round again. I doubt I`ll find a better one at the wreckers.
Cheers
Graham.
[Edited on 5-12-2004 by 57 Chook Shed]
One mans cancer is another mans patina
[img]http://forums.aussieveedubbers.com/viewtopic.php?action=attachment&tid=87480&pid=815561&aid=84900[img]
[img]http://forums.aussieveedubbers.com/viewtopic.php?action=attachment&tid=87480&pid=815561&aid=84900[img]
kitekombi Casual Dubber
47 posts · joined Dec 2004 ·
kombibob, Im in Melbourne. Ride a 12m fuel and a 16m Aero2:beer