Wanted:
I'm after a input shaft for an early 36hp Type 1 gearbox, must have groove for bearing circlip in front of first gear (pre9/57). Also teeth on the first gear must be in in very good condition ie no pitting.
Swap: A couple of oval doors (no rust but need work) for some oval or later model original wheels (edge of rim must be straight)
For sale: Early T1 4 tab Bonnet Straight (no raised section under badge area) This has been completely stripped to bare metal on both sides and refinshed using PPG automotive paint. No rust.
Location: Sydney
Cost: $150
Contact: Wayne, 0403853333
Photo's:
http://members.optusnet.com.au/woosy/4tabhood-1.jpg
http://members.optusnet.com.au/woosy/4tabhood-2.jpg
http://members.optusnet.com.au/woosy/4tabhood-3.jpg
http://members.optusnet.com.au/woosy/4tabhood-4.jpg
ovalbug Officially Full-On Dubber
262 posts · joined Dec 2004 ·