REDKG Officially Full-On Dubber
327 posts · joined Aug 2002 ·
what is the best chemical for cleaning off fishoil.
Fishoil
5PL1TDCS10N Insano Dub Head
845 posts · joined Jan 2003 ·
Try mineral turps
Wax + grease remover
Auto Paint thinners....
one of these will work depending on how cured/old the fishoilene is.
(!)😀
Wax + grease remover
Auto Paint thinners....
one of these will work depending on how cured/old the fishoilene is.
(!)😀
Baja Wes V6 Baja Pioneer
3,119 posts · joined Aug 2002 ·
If it has fully cured you will not remove it with chemicals (apart from paint stripper). You need sandblasting, wire brush wheel or sanding.
Wes - www.offroadvw.net - 200HP Quad Cam V6 in a VW Baja - with climate control... 🙂
www.taylorcycles.com.au - My DH MTB racing brothers shop.
www.taylorcycles.com.au - My DH MTB racing brothers shop.
68AutoBug Beetle Restorer - Experience over 138\% - YIKES --
11,654 posts · joined Aug 2002 ·
I was going to say "You don't take fish oil off" but if its somewhere that has to be painted or seen...
Its great under the guards and on the chassis... I have about 4 litres of Fish Oil in MY Beetle.... Talking about fishoil .. I have been using it since the late 60's and I have used just about every brand on the market , but My Son just bought a 4 litre tin of Motorpro fish oil and it is THE BEST I have used... Dries within a few days... and sticks very well... I do have some on undercoated paint which I will have to get off somehow.. probably wet & dry paper....😀:o:thumb
Its great under the guards and on the chassis... I have about 4 litres of Fish Oil in MY Beetle.... Talking about fishoil .. I have been using it since the late 60's and I have used just about every brand on the market , but My Son just bought a 4 litre tin of Motorpro fish oil and it is THE BEST I have used... Dries within a few days... and sticks very well... I do have some on undercoated paint which I will have to get off somehow.. probably wet & dry paper....😀:o:thumb
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---
Andy Andy\'s Adventures
2,820 posts · joined Nov 2002 ·
I've always use petrol, works great, but can't say I've tried it on fishoil that's had a few years to dry.
wrecker67 Fahrvergnugen
997 posts · joined Aug 2002 ·
hi there scratch it up and hit it with paint striper,then clean with sandpaper,treat steel with steelwool,...if its to be top coat painted start from bare metal for best results...cheers:beer