I haven't had much experience in Kombis, but I was imagining what it would be like to turn a Kombi bus/van into a convertible. By all means, you would need engineers approval, couple of roll bars etc. (I think), but is it technically applicable to do so?
After hearing news that buggies are apparently a dead market, and that so far the NSW RTA have made it impossible for kit cars (like buggies) to be registered if never registered before (ie: new ones), I am searching for a new project/mod to do to a car so I can atleast have the potential to drive in on a road. Hence why I have asked this question.
I do live in queensland however, but if I spend heaps of $$$ on a buggy, and find out i can't register it, I'm screwed!!!
Hence why im not sure of taking the risk.:duh
[Stupid RTA, :puke:repuke:puke:repuke:repuke
------------------------------------------------------------------------------
Why are my underpants burning?😠
bajachris88 The international telephone dialing code for Antarctica is 6
6,661 posts · joined Apr 2005 ·
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
