Skip to content
Aussieveedubbers

Carby Jets

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

76camper Fahrvergnugen

884 posts · joined Jan 2005 ·

#435419
Now have the $$ for some jets for my type 4 2L kombi. I beleive it currently have either largers than stock jets or reamed stock yets. Does anyone have a set of stock jets for Solex 32-34 PDIST-2 (RHS) and 32-34 PDIST-3 (LHS) carbies or know what size is stock and where i can get it from? Thanx guyz.
http://www.bytevision.com.au/dee/kombi/index.htm

Bizarre Moderator The artist formerly known as blue74l

12,785 posts · joined Aug 2002 ·

#435450
http://www.type2.com/library/fuel.htm#3

Try here for ideas

Then ring
CARBURETTOR SERVICE CO PTY LTD
240 Parramatta Rd Burwood 2134 (02) 9747 4066


Your in trouble if THEY dont have jets for it
Futue te ipsum!!!

Beerboy Custom Title Time!

1,030 posts · joined Jul 2004 ·

#435548
i keep reading that motorbike ones are the same. this is for a pict34 -4 though.

just increased mine but want a touch smaller
WANTED kombi drivers side rear corner for a early bay! found after six years lol
WANTED engine lid for early kombi 71

Bizarre Moderator The artist formerly known as blue74l

12,785 posts · joined Aug 2002 ·

#435549
As a stop gap measure you can solder them back up and then redrill them

This should only be done for correcting and over drilled jet and checking purposes.
Once satisfied you should buy the correct ones.

There are also reamers as opposed to drills.

Reamers leave a smooth edge as opposed to the rough edge of the drill
Futue te ipsum!!!