surface rust on the roof of a splitty

nicko Officially Full-On Dubber

389 posts · joined Mar 2003 · 21 Dec 2005, 8:02 am

#439995

I have surface rust on the roof of my splitty and were wondering what is the best way to remove it without damaging or warping the panels. It is quite severe in terms of surface rust and virtually covers the whole roof so I were hoping for some sought of mechanical means. What do panelbeaters/painters do?
Thanks Nicko

helbus Administrator Mad fabricator, paint and body

7,386 posts · joined Sep 2002 · 21 Dec 2005, 8:44 am

#440007

You can use clean 'n' strip wheels

There are ones now you can get that are able to be put on an angle grinder. If you can get yourself a variable speed angle grinder, that will be the best way.

Also after it has mechanically been removed, a phosphate based rust removing acid is the next step. It will eat into the remaining stains and also condition the surface of the metal.

Sia strip discs

http://www.sia-abrasives.com/fibral/en/89E7CE71A9394D11840AD80ABC2B17FD.html

Septone Phosphoric acid

http://www.septone.com.au/detail.asp?item_cat=11&item_number=357&page_num=1

EJ22 into Bay Microbus - Finished project build thread- click on this spot here for info

nicko Officially Full-On Dubber

389 posts · joined Mar 2003 · 21 Dec 2005, 9:01 am

#440012

Thanks Helbus Would you go for a 4 inch angle grinder or larger or would a buffer be any use.
Nicko

helbus Administrator Mad fabricator, paint and body

7,386 posts · joined Sep 2002 · 21 Dec 2005, 10:11 am

#440020

A 4 inch angle grinder will do it

EJ22 into Bay Microbus - Finished project build thread- click on this spot here for info

58SPLIT Seriously Crusin Dubber

148 posts · joined May 2004 · 21 Dec 2005, 11:51 am

#440048

I had to sand blast my roof.