ruckus Veteran Volks Folk
2,118 posts · joined Jun 2004 ·
Ok so it's established I have no idea. How do you get the seats off the runners on a 70 standard bug?
Stupid question of the week: removing beetle seats.
hellbugged 48's and straight cuts
5,080 posts · joined Apr 2003 ·
not 100% sure because of the year, but if its the type that has two rails under the seat this should work.
slide the seat back, look down at the front of the slidder rail (tunnel side), there is a tab on the top of the rail, that sticks up at an angle, so as to catch the seat frame as its about to go off the end of said rail.
use a long screwdriver to hold this tab down as you slide the seat back over the top of it. once you get the tab started under the seat, your laughing
slide the seat back, look down at the front of the slidder rail (tunnel side), there is a tab on the top of the rail, that sticks up at an angle, so as to catch the seat frame as its about to go off the end of said rail.
use a long screwdriver to hold this tab down as you slide the seat back over the top of it. once you get the tab started under the seat, your laughing
helbus Administrator Mad fabricator, paint and body
7,386 posts · joined Sep 2002 ·
The return spring has to be unclipped also. I found on our standard that by taking the plastic floor vents out prevented the seat from scratching them on their way forward
ruckus Veteran Volks Folk
2,118 posts · joined Jun 2004 ·
Thanks guys, I'll give it a bash.