vw 1300 engine, from my 1967, haven't seen it run, but from when i bought it (about a month and a half ago), was said that it has run.
NOTE: the engine turns, however is missing components. Exhaust is missing (Am keeping the baja extractor/hotdog exhaust), airfilter (am keeping the donaldson it had :P ), alternator, genny, fan, fan housing, fan belt.
NOTE: Flywheel is grinded, not totalled, however is straight but a little chewed.
All else is there, clutch and all. Any more questions, ask karmen (On avd here, he gave me the engine with my car), if else, ask me too. I will see what i can do.
reason for sell: I am making an offroader, and being a lousy typical teen driver, i need more balls in my car, and would least go for a 1600tp.
Price for engine: $129 or nearest offer.
location: edenslanding, between bris and goldcoast, QLD.
Sellers name: Christopher
phone number: 3805 3756, if am not home, leave a message and ur name/details, i will get back to u ASAP.
can also access me on U2U, or email at :
mynameischris88@hotmail.com
[ Edited on 17/4/2006 by bajachris88 ]
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
Carby was recently cleaned out, think there was also a compression test done to it recently, and was all good. + it doesn't leak oil either.
Karmen, feel free to ad more about the engine on this if u wanna. I don't know as much as u on the history of it. Thanx mate
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
history is vague
but fan was rattly so got it off.
no compr test done but would take few mins
post up the eng nr Chris so we can check if 1300
cert is sp
cert is 67 car
Karmen
56 oval resto 60 Cal KG
58 & 62 beetle parting. 74 panel parting
63 Baja 80 GLD parting
58 donor split 11 window 63 Splitty sgle cab /son's
96 Seat Cordoba GLX daily drvr.
Interested, but getting it to my place would be a problem. Are you going to Valla this year? I'm in no hurry.
Matt.
single or twin port?
inlet manifold in good nick?
what size carby on it?
engine number?
thanxs
Customer service is not dead in Australia.
Always after HAZET & MATRA & VW factory tools
Tis single.
Inlet manifold? Lol, have no clue. Will get pics if that helps ?
Size carby? Dunno. How does one tell?
Engine number, will get in morning.
Cheers.
I wanna get the info for ya, just am nu to the whole thing. Hence y i want a complete motor, rather than having to track down parts and work out where to put the bloody things Lol 😂
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
left hand side of the carby towards the back you will see vw logo cast into the side of the float chamber there will also be writing & some numbers eg. solex pict 28, or pict 30 etc.
some pics of engine would be real good.
Matt.
Done it again!!! Jjust realised I'm logged in as my son. I am Matt Ryan, - he is "special"
[ Edited on 22-2-2006 by Special ]
soz for the delay, have been incredibly busy with uni coming next week, money, work, driver training, etc. etc.
Heres the engine number: 9091815
Got some pics. Hope these help. Maybe....
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
hope those pics help. Will see about this Pint wateva wateva, have a looksies probably tomorrow. Will see, another busy day ahead though, will try to squeeze in time. My life will chill in the next week or so, am looking forward to when i get settled into uni.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
its Pict Chris and vey easy to spot
could be a 40 hp carbie 28 pict as i may have changed it during debugging process lol.
anyways can get the engine to Coffs 4 u if Matt wants it say $30
as my Neff is startin at Nathan Campus
where are u startin ??
also have missing fan and can get a 12 volter alt . if he wants cheap
see aint forgotten u !! and still have the 1600tp.
Karmen
56 oval resto 60 Cal KG
58 & 62 beetle parting. 74 panel parting
63 Baja 80 GLD parting
58 donor split 11 window 63 Splitty sgle cab /son's
96 Seat Cordoba GLX daily drvr.
Thanx karmen. What u been up to lately mate?
yeah, am still interested in the 1600 tp with the recond 1600 kombi box. Gimme some time though, Lol, am so tight with cash (I just bought another bug, turned out in betta condition, and cheaper to get that one then what it would to fix up the rust on the 67 Got some beaut spares off the 67 that would come very useful, and feel that although the chassis is rooted and the body is gonna go, i still got my $ worth Especially in baja kit)
Anyways, Neva had to seriously budget before, but i am starting to get a taste of it, tastes terrible. Have learnt to value the dollar too. Lol
Am starting uni at QUT (Gardens point), in the city. If matt wants it, he would pay an extra $30 on top of it. will check pict. Will try to do it this arvo.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
ok, squeezed in a bit of time, tracked down more engine details. is Solex Pict 28, heres a piccy of it:
Soz for those on dial up, but heaps of pics of everywhere (well, pretty much everywhere) help in ur judgements whether this engines for u or not.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
Sorry Chris,
I'll have to pass on this one as I currently find myself between jobs. Looks like some serious budgetting for me for a while too.
Thanks Karmen for the transport offer, I was going to splurge with my severance pay then realised that it probably wasn't the most sensible thing to do (head 1, heart 0)
Matt.
[ Edited on 25-2-2006 by Matt Ryan ]
no worries mate. 🙂
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
still up for grabs
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
