lowrider Officially Full-On Dubber
329 posts · joined Sep 2002 ·
or dumped Monday.
Location Noosa hinterland QLD
Call Andy 54499066 or 0402 379 044 or u2u me
Type 3 1500 case; was align bored & new mains many years ago, but the assembler (not me!) forgot to torque the flywheel resulting in it coming loose & stopping engine. The crank was ground too, now it needs dowel pin holes re-done.
Rods,barrels & pistons; I think these were good but barrels probably need a light hone.
Engine was set up as an upright with fan housing & 6V gen.
All been sitting in pieces for long time so will need a clean but its all FREE.
There is another type 1 case and assorted tinware; a early 60s fuel tank;
heads, OK I think; also an early kombi oil bath air cleaner, maybe a carby or two; can't remember; will look today & update this if necessary.
[ Edited on 18-4-2006 by lowrider ]